Muffler
Show/hide table
 | |
| 图 1 | g02152963 |
前视图 (3) 管路组件 (4) 消声器组件 | |
(1) 将卡箍槽视为目视导向并拧紧螺栓。 将螺栓拧紧至卡箍槽半关闭。
(2) 螺母的扭矩 ... 50 ± 10 N·m (37 ± 7 lb ft)
注: 请参见图 1 以便定位消声器管箍 (5) 。 在管阳端的外径和涡轮增压器出口管的锥度上涂抹一薄层 3M 密封胶 EC-1137。 卡箍组装前，去除接头上多余的密封胶。
(6) 螺栓的扭矩 ... 68 ± 12 N·m (50 ± 9 lb ft)
Show/hide table
 | |
| 图 2 | g02152965 |
(C) 以 107 ± 5 mm (4.2 ± 0.2 in) 的距离用 U 形螺栓定位并固定消声器。
Caterpillar Information System:
C4.4 Industrial Engine Turbocharger - Single Turbocharger
C4.4 Industrial Engine Temperature Sensor (NOx Reduction System)
C11 and C13 Engines Engine Oil Cooler
C4.4 Industrial Engine Exhaust Gas Valve (NRS)
325D and 329D Excavators Joystick Controls Alternate Patterns
C13, C15, and C18 Tier 4 Final Engines Air Lines
C4.4 Industrial Engine Exhaust Cooler (NRS)
C27 and C32 Tier 4 Engines Mounting Frame
C4.4 Industrial Engine Electrical System
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold
C27 and C32 Engines for Caterpillar Built Machines ECM - Replace
2010/05/24 A Redesigned Water Lines Group Is Now Used on Certain 3516B Locomotive Engines {1380}
C4.4 Industrial Engine Turbocharger - Series Turbochargers
320E and 323E Excavators Cooling System Coolant Extender (ELC) - Add
320E and 323E Excavators Cooling System Coolant Level - Check
C15 and C18 Engines Fuel Priming Pump - Replace
C15 and C18 Engines for Caterpillar Built Machines Fan Drive
C13, C15, and C18 Tier 4 Final Engines Inlet Manifold Air Pressure Sensor
2010/05/19 An Improved Water Line Is Now Used on Certain Commercial Engines {1355, 1380, 1393}
2010/07/30 New Cage Assembly Is Used on TH48-E80 Petroleum Transmissions {3160}
C11 and C13 Engines Fuel Injector
C6.6 Industrial Engine Vibration Damper and Pulley
C9.3 Engines for Caterpillar Built Machines Electrical Connectors
C6.6 Industrial Engine Vibration Damper - Check