Fuel Tank - Remove and Install
拆卸步骤
Show/hide table
 |
车斗降下后，车斗与机架之间没有空隙。 如果不安装固定缆线，可能会导致在此区域作业的人员受伤或死亡。 |
Show/hide table
|
失火会造成人身伤害或死亡。 渗漏或溅溢到热表面或电气部件上的燃油会引起失火。 要擦净所有泄漏或喷溅的燃油。 对燃油系统进行工作时不要吸烟。 更换燃油滤清器时，要将断路开关转到“断开”位置或断开蓄电池。 |
- 安装车斗固定拉线。 操作和保养手册, "拉线（车斗固定）"。
- 将电源断路开关转至断开位置。
- 将燃油箱中的油排入合适的容器以便保存或废弃这些油。 请参阅操作和保养手册, "燃油箱水和沉淀物 - 排放"。
- 断开线束组件 (1) 。 断开软管组件 (2) 和软管组件 (3) 。
Show/hide table
 | |
| 图 1 | g02134795 |
- 断开软管 (4) 并拆下连接紧固件。
Show/hide table
 | |
| 图 2 | g02134774 |
- 卸下螺栓 (5) 。
Show/hide table
 | |
| 图 3 | g02134814 |
- 将适当的起吊设备连接在燃油箱 (6) 上。 空燃油箱 (6) 的重量约为 3084 kg (6800 lb)。
Show/hide table
 | |
| 图 4 | g02135333 |
- 拆下螺栓 (7) 。 卸下盖 (8) 和垫片 (9) 。 对于另一侧，重复本步骤。
Show/hide table
 | |
| 图 5 | g02135373 |
- 卸下燃油箱 (6) 。
Show/hide table
 | |
| 图 6 | g02135534 |
安装步骤
- 按相反顺序安装燃油箱 (6) 。
- 测量燃油箱上的尺寸 (X) 。
Show/hide table
图 7 g02135633
Show/hide table
图 8 g02135653
- 安装盖 (9) 。 测量机架上的尺寸 (Y) 。
- 从尺寸 (Y) 中减去尺寸 (X) ，以便确定垫片的所需厚度。 使用垫片 (9) ，以便在各螺栓之间获取一个 0.00 - 0.12 mm (0.000 - 0.005 in) 的间隙。
Caterpillar Information System:
349F and 352F Excavators Machine System Relief Valve (Line)
C32 Petroleum Generator Sets Fuel Injector - Inspect/Adjust/Replace
2010/04/30 Wiring Change to the Emergency Stop Button for 3500B and 3500C Marine Series 2 Engines {1408, 7332}
C13, C15, and C18 Tier 4 Interim Engines System Overview
797F and 797F XQ Off-Highway Trucks Machine Systems Control Valve (Hoist and Brake Cooling) - Remove and Install
C15 and C18 Industrial Engines Variable Valve Actuator Oil Pressure Sensor - Remove and Install - For Series Turbocharger Applications
2010/05/13 Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
C15 and C18 Industrial Engines Variable Valve Actuator Oil Pressure Solenoid - Remove and Install - For Series Turbocharger Applications
3516C Locomotive Engine Maintenance Recommendations
2010/05/12 Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
C15 and C18 Engines for Caterpillar Built Machines Fuel Pressure Regulator - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Oil Consumption Is Excessive
TH48-E80 Petroleum Transmission Transmission Cooling System
2014/06/13 A New Air Shutoff Gp Is Used on Certain C280 and 3600 Engines {1078}
Inspection of Rear Engine Mounts on 3500 Family of Engines {1152, 1154} Inspection of Rear Engine Mounts on 3500 Family of Engines {1152, 1154}
3500 Engines Turbocharger - Disassemble
3500 Engines Turbocharger - Assemble
C27 and C32 Engines for Caterpillar Built Machines Idle Speed Is High
3516C Locomotive Engines Air Inlet Manifold - Remove and Install
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Unit Initial Check
797F and 797F XQ Off-Highway Trucks Machine Systems Hood (Front) - Remove and Install
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Metering - Check
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz System Shutdown
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Cabinet - Check