Accessory Drive
Show/hide table
| |
| Illustration 1 | g03279157 |
Show/hide table
| Specification for 269-8611 Accessory Drive Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 7N-5279 Adapter As | After assembly, bore of 127-5400 Bushing is During assembly, align the hole in the bushing with the adapter assembly. |
| 2 | 2 | 9X-7371 O-Ring Seal | Before assembly, lubricate the bore lightly with the lubricant that is being sealed. |
| 3 | 1 | 235-3546 O-Ring Seal | Before assembly, lubricate the bore lightly with the lubricant that is being sealed. |
| 4 | 4 | 7N-7539 Thrust Washer | Thickness is |
| 5 | 1 | 7C-4165 Adapter As | After assembly, bore of 127-5400 Bushing is During assembly, align the hole in the bushing with the adapter assembly. |
| 6 | 2 | 7N-5874 Auxiliary Drive Shaft | Diameter is Width of the groove for the thrust washer (4) is |
| 7 | 3 | 259-4598 O-Ring Seal | Before assembly, lubricate the bore lightly with the lubricant that is being sealed. |
| 8 | 1 | 155-2307 Idler Gear As | After assembly, bore of 116-1365 Bearing is Installation depth of bearing is |
| 9 | 1 | 164-4995 Washer Assembly | Thickness of 164-4996 Thrust Washer is Protrusion of 7N-2047 Dowel is |
| 10 | 1 | 199-2889 Idler Shaft | Diameter is |
| 11 | 1 | 8N-8210 Adapter As | After assembly, bore of 127-5400 Bushing is Installation depth of bushing is |
Caterpillar Information System:
C175-16 Locomotive Engine Temperature Sensor - Engine Coolant
C175-16 Locomotive Engine Temperature Sensor - Exhaust Temperature
Procedure for Improving the Ground System{4459, 7423} Procedure for Improving the Ground System{4459, 7423}
793F Off-Highway Truck Engine Supplement Engine Oil Cooler - Remove and Install
3516C Locomotive Engine Emergency Stopping
C13 Industrial Engines Fuel Priming Pump and Primary Fuel Filter - With Water Separator
C13 Industrial Engines Fuel Priming Pump and Primary Fuel Filter - With Water Separator
C13, C15, and C18 Tier 4 Final Engines Fuel Priming Pump and Primary Fuel Filter - With Water Separator
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
2010/03/05 A New Spark Plug Is Used on some G3500 Generator Set Engines {1550, 1555}
G3520E Generator Set Engines Piston and Rings
C11 and C13 Engines Muffler
349F and 352F Excavators Fuel Tank Shutoff and Drain Control
TH55FT-E70 and TH55FT-E90 Transmissions Transmission Cooling System
C13 Industrial Engines Electronic Unit Injector Wiring
TH48-E80 Petroleum Transmission S·O·S Information
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold Shield
TH55FT-E70 and TH55FT-E90 Transmissions Reference Material
3516C Locomotive Engine Fuel Tank Water and Sediment - Drain
EMCP4.3/4.4 Parallel Operation - EMCP 4.4
2010/04/02 Information on the New Valve Recession Tool Gp that Is Used on All G3500 Commercial Engines {0701, 1105}
3516C Locomotive Engine and Generator Set Configuration Parameters
Installing the Package Mounted Radiator for the C175 Generator Set Engine {1353, 1356} Installing the Package Mounted Radiator for the C175 Generator Set Engine {1353, 1356}
797F Off-Highway Truck Power Train Oil Filter and Base (Differential) - Remove and Install