Water Pump - Test
Show/hide table
| Tools Needed | ||
| Part Number | Part Name | Quantity |
| 6V-7775 | Air Pressure Gauge | 1 |
Show/hide table
| |
| Illustration 1 | g02068054 |
|
Right side of engine (1) Plug (2) Water manifold | |
Show/hide table
 |
|
Making contact with a running engine can cause burns from hot parts and can cause injury from rotating parts. When working on an engine that is running, avoid contact with hot parts and rotating parts. |
Perform the following procedure in order to determine if the water pump is operating correctly:
- Remove plug (1) from bonnet (2).
- Install the 6V-7775 Air Pressure Gauge in the port.
- Start the engine. Run the engine until the coolant is at operating temperature.
- The water pump pressure should be at least
100 kPa (15 psi) at 1800 rpm.
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Crankshaft
C9.3 Tier 4 Interim Engines Configuration Parameters
349F and 352F Excavators Machine System Cylinders (Boom, Stick and Bucket)
C27 and C32 Generator Set Engines Fuel Transfer Pump
Hydraulic Excavator Roller Disassembly and Assembly Procedures {0729, 0768, 4154, 4180, 4181} Hydraulic Excavator Roller Disassembly and Assembly Procedures {0729, 0768, 4154, 4180, 4181}
C13, C15, and C18 Tier 4 Final Engines Cylinder Block
C13, C15, and C18 Tier 4 Final Engines Cylinder Block
2009/12/24 Normal Wear on the Cylinder Liners of Some C11 and C13 Engines {1201}
G3500 Engines Model View Illustrations
3412E and C30 Marine Engines Maintenance Interval Schedule - Fast Craft
3412E and C30 Marine Engines Maintenance Interval Schedule - Standard
C9.3 Tier 4 Final Engines Crankshaft Pulley
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561} Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
C13, C15, and C18 Tier 4 Final Engines Exhaust Lines (DPF Inlet)
C27 and C32 Engines for Caterpillar Built Machines Exhaust Temperature Is High
C4.4 Industrial Engine High Pressure Fuel Lines
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553} Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
C4.4 Industrial Engine Electrical System
C6.6 Marine Generator Set ECM Memory - Test
C15 and C18 Engines for Caterpillar Built Machines Speed Control - Test
C175-16 PETROLEUM ENGINES Engine Oil and Water Pump Drive - Disassemble
C175-16 PETROLEUM ENGINES Engine Oil and Water Pump Drive - Assemble
C27 and C32 Engines for Caterpillar Built Machines Oil Contains Coolant