1989/03/06 Caterpillar

New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}

Usage:

3114, 3116, 3208, 3304, 3306, 3406, 3408, 3412, 3508, 3512, 3516, D379, D398, D399 Industrial, Generator Set, And Marine Engines

SUPPLEMENT: 10/02/89

SERVICE MAGAZINES: ...FEBRUARY 29, 1988; PAGE 13; "List Of Engine Wall Charts Available" on D379, D398, D399, 3300, 3400, 3500 Families of Engines. ...JUNE 27, 1988; PAGE 3; "Charts and Decals Available for Lubrication and Maintenance Intervals." ...NOVEMBER 28, 1988; PAGE 5; "More Charts And Decals Available For Lubrication And Maintenance Intervals." ...MARCH 6, 1989; PAGE 6; "New Engine Wall Charts Give Maintenance Management Recommendations" for D379, D398, D399, 3114, 3116, 3208, 3300, 3400, 3500 Families of Industrial, Marine and Generator Set Engines.

Disregard these articles and make reference to the new article "Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals" in this issue.

--------------- END SUPPLEMENT ---------------

Many new Engine Maintenance Management Wall Charts are available. The chart lists form numbers of the new wall charts for various engine models and applications.

Caterpillar Information System:

1989/03/06 High Horsepower Standby Generator Set Engines{1000}

1989/02/27 Troubleshooting 3406B (PEEC) Truck Engines Equipped With Power Demand Cruise Control (PDCC){1705}

1989/02/27 Updated 7X1830 SPM For 8T5282 3406B PEEC DDT Available{1707,1705}

1989/02/27 New Features And Enhanced Fault Codes Available In New PEEC Personality Modules{1707,1705}

1989/02/27 Surface Marks On Roller Bearing Cages Are Not Cracks{7551}

1989/02/20 New Gasket Replaces O-Ring Seal On Manual Valve Group And Plug Group Used For Testing Cylinder Pressure{1101}

1989/02/20 Part Numbers For Relays And Clip In Electronic Modular Control Panel{4450,4469,7451}

1989/02/13 Improved Valve Lifter Assemblies; Better Insert Retention{1112}

1989/02/13 New Nut In Fresh And Raw Water Pumps Has More Corrosion Resistance{1371}

1989/02/13 Cold Start Procedures For 3406 (PEEC) Truck Engines{1705}

1989/02/13 New Publication Available-"Coolant And Your Engine"{1395,0374,0375}

1989/01/30 New Head Gasket Available; Head Gasket Replacement Guidelines{1124,1216,1221}

1989/03/06 New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}

1989/03/20 Elbow Fitting Available To Allow "Quick-Drain" Line To Oil Pan{1302,1307}

1989/03/20 Improved Magnet Used In Rack Assembly{1705,1286}

1989/03/20 Correct Torque For Bolts That Fasten Pulley To Stub Shaft In Radiator Group{1350}

1989/03/27 Limitations On Engine Cranking Time{1453,1401}

1989/03/27 Understanding "Shorts," "Opens" and "Intermittents"{1400}

1989/03/27 Understanding Causes Of Blown Fuses And Tripped Circuit Breakers{1400,1420}

1989/03/27 How To Troubleshoot A Short-To-Ground In Power Wiring{1400}

1989/03/27 Preventive Maintenance For Batteries{1401}

1989/03/27 Bolts Must Be Reinstalled In Same Holes In Companion Flange And Gear Output Flange{3305,3360}

1989/03/27 Exciter Rotor Retaining Bolt Torque Specification{4457}

1989/03/27 Additional Remanufactured Parts Available{1000}