Water Pump
Show/hide table
Illustration 1 | g02063362 |
(2) Seal group
(4) Water pump gear (5) Ball bearing (6) Impeller (7) Water pump shaft (8) Bolt |
(1) Lubricate the bore of the O-ring seal with the lubricant that is being sealed.
(3) Do not lubricate the lip of the lip type seal.
(A) Distance between the pump flange and the impeller hub ...
Show/hide table
Illustration 2 | g02063874 |
Show/hide table
Illustration 3 | g02264374 |
Note: Orient the cup plug weep hole (9) at ± 10 degrees from vertical, as shown.
(9) Maximum installation depth of the cup plug ...
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
C13, C15, and C18 Tier 4 Interim Engines Solenoid Valve - Test
3512B HD SR500 Generator Sets Generator Bearing Temperature - Test/Record
3512C HD SR500 Generator Sets Manual Stop Procedure
C18 Generator Sets Overspeed
Idler Service Evaluation Checklist {4159, 4167} Idler Service Evaluation Checklist {4159, 4167}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561} Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
G3500H 60Hz Generator Sets Fluid Recommendations
C15 and C18 Petroleum Generator Sets Battery Disconnect Switch - If Equipped
Updating the Wiring Harness of the Engine Brake on Some C15 Engines{1290, 1408, 1900} Updating the Wiring Harness of the Engine Brake on Some C15 Engines{1290, 1408, 1900}
EMCP4.1/EMCP4.2 General Information
C7 and C9 On-Highway Engines Diesel Particulate Filter Collects Excessive Soot
C9.3 Tier 4 Final Engines Crankshaft Pulley
3412E and C30 Marine Engines Maintenance Interval Schedule - Standard
3412E and C30 Marine Engines Maintenance Interval Schedule - Fast Craft
G3500 Engines Model View Illustrations
2009/12/24 Normal Wear on the Cylinder Liners of Some C11 and C13 Engines {1201}
C13, C15, and C18 Tier 4 Final Engines Cylinder Block
C13, C15, and C18 Tier 4 Final Engines Cylinder Block
Hydraulic Excavator Roller Disassembly and Assembly Procedures {0729, 0768, 4154, 4180, 4181} Hydraulic Excavator Roller Disassembly and Assembly Procedures {0729, 0768, 4154, 4180, 4181}
C27 and C32 Generator Set Engines Fuel Transfer Pump
349F and 352F Excavators Machine System Cylinders (Boom, Stick and Bucket)
C9.3 Tier 4 Interim Engines Configuration Parameters
C13, C15, and C18 Tier 4 Final Engines Crankshaft