Do Not Weld Rods To Eyes, Straighten Rods, Or Build Up Rods With Weld On Any Steering Cylinders, Scraper Bowl Lift Cylinders, Or Truck Suspension Cylinders{4303,5303,7201}
Usage:
When salvaging hydraulic cylinder rods, certain procedures and recommendations should always be followed. Use the Guidelines For Reusable Parts, "Inspection and Salvage of Hydraulic Cylinders and Rods", SEBF8072-01.
Of particular importance is the following Warning which appears on several pages in SEBF8072-01. The term "rerodding" means replacing only the rod portion, and reusing the eye on the new rod portion.
Show/hide table
Caterpillar does NOT recommend rerodding, straightening or building up with weld any rods that are used in steering cylinders, scraper bowl cylinders, or suspension cylinders on trucks. These types of rods can be ground and chrome plated, if done according to Caterpillar specifications.
|
Caterpillar Information System:
1989/01/23 New Procedures To Adjust Woodward EGB29P Governor/Actuator Linkage{1265}
1989/01/23 New Crankshaft Seal Adapter O-Ring Seal Is Made Of Higher Temperature Material{1160,1161}
1989/01/23 Be Sure Battery Charger Connections Are Correct{1406}
1989/01/16 High Performance Maintenance Free Battery Available{1401}
1989/01/16 Improved Rod Seal Combinations Used In Hydraulic Cylinders{4303,5100,5200,5300,5450,5550}
1989/01/09 New Special Instruction Available - "Storage Procedure For Caterpillar Products"{1000,7000}
1989/01/09 Indexes For Special Instruction Microfiche Libraries{0374}
1979/12/24 New Linkage Kits With Improved Parts Are Available For Repair Of Front Power Takeoff Clutches{3055,3059}
1979/12/24 Too Much Clearance For Exhaust Valves Can Cause Wear To The Camshaft Lobes And Valve Lifters{1105,1210,1209}
1979/12/24 Track-Excited Vibration{4121}
1979/12/24 Crankcase Capacity Increased; New Dimensions For Marks On Oil Level Gauge{1318,1302}
1979/12/17 General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1989/01/30 New Head Gasket Available; Head Gasket Replacement Guidelines{1124,1216,1221}
1989/02/13 New Publication Available-"Coolant And Your Engine"{1395,0374,0375}
1989/02/13 Cold Start Procedures For 3406 (PEEC) Truck Engines{1705}
1989/02/13 New Nut In Fresh And Raw Water Pumps Has More Corrosion Resistance{1371}
1989/02/13 Improved Valve Lifter Assemblies; Better Insert Retention{1112}
1989/02/20 Part Numbers For Relays And Clip In Electronic Modular Control Panel{4450,4469,7451}
1989/02/20 New Gasket Replaces O-Ring Seal On Manual Valve Group And Plug Group Used For Testing Cylinder Pressure{1101}
1989/02/27 Surface Marks On Roller Bearing Cages Are Not Cracks{7551}
1989/02/27 New Features And Enhanced Fault Codes Available In New PEEC Personality Modules{1707,1705}
1989/02/27 Updated 7X1830 SPM For 8T5282 3406B PEEC DDT Available{1707,1705}
1989/02/27 Troubleshooting 3406B (PEEC) Truck Engines Equipped With Power Demand Cruise Control (PDCC){1705}
1989/03/06 High Horsepower Standby Generator Set Engines{1000}