1989/01/09 Caterpillar


Indexes For Special Instruction Microfiche Libraries{0374}

Usage:


If you can not find a particular Special Instruction in the index for the Caterpillar Special Instruction Microfiche Library (SBFY1006), look also in the index for the Engine Special Instruction Microfiche Library (SBFY1008). Some Special Instructions only appear in the Engine Library.

Caterpillar Information System:

1979/12/24 New Linkage Kits With Improved Parts Are Available For Repair Of Front Power Takeoff Clutches{3055,3059}
1979/12/24 Too Much Clearance For Exhaust Valves Can Cause Wear To The Camshaft Lobes And Valve Lifters{1105,1210,1209}
1979/12/24 Track-Excited Vibration{4121}
1979/12/24 Crankcase Capacity Increased; New Dimensions For Marks On Oil Level Gauge{1318,1302}
1979/12/17 General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17 Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/10 New Cylinder Heads Are More Rigid And Stronger{1100}
1979/12/10 Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10 Improved 6V2012 Micrometer Depth Gauge Set Has Increased Range To Permit Deeper Measurement{0653,5070}
1979/11/26 Fabricated Tester For Regulator-Exciter Control Assemblies Used On SR-4 And SRCR Generators{0652,4451,4452,4454,4467}
1979/11/26 Former Oil Pump Group Is Now Used Again{1304}
1979/11/26 New Cylinder Block Has More Material Around Liner Seat Area{1201}
1989/01/09 New Special Instruction Available - "Storage Procedure For Caterpillar Products"{1000,7000}
1989/01/16 Improved Rod Seal Combinations Used In Hydraulic Cylinders{4303,5100,5200,5300,5450,5550}
1989/01/16 High Performance Maintenance Free Battery Available{1401}
1989/01/23 Be Sure Battery Charger Connections Are Correct{1406}
1989/01/23 New Crankshaft Seal Adapter O-Ring Seal Is Made Of Higher Temperature Material{1160,1161}
1989/01/23 New Procedures To Adjust Woodward EGB29P Governor/Actuator Linkage{1265}
1989/01/30 Do Not Weld Rods To Eyes, Straighten Rods, Or Build Up Rods With Weld On Any Steering Cylinders, Scraper Bowl Lift Cylinders, Or Truck Suspension Cylinders{4303,5303,7201}
1989/01/30 New Head Gasket Available; Head Gasket Replacement Guidelines{1124,1216,1221}
1989/02/13 New Publication Available-"Coolant And Your Engine"{1395,0374,0375}
1989/02/13 Cold Start Procedures For 3406 (PEEC) Truck Engines{1705}
1989/02/13 New Nut In Fresh And Raw Water Pumps Has More Corrosion Resistance{1371}
1989/02/13 Improved Valve Lifter Assemblies; Better Insert Retention{1112}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.