Pilot Lines
Show/hide table
图 1 | g01957381 |
顶视图 |
注: 所有电缆带的各个切割边处不允许有尖角。
(1) 压力传感器的扭矩 ... 29 ± 2 N·m (257 ± 18 lb in)
Caterpillar Information System:
2009/08/24 New Fuel Injection Lines {1251, 1252}
3508C, 3512C and 3516C Locomotive Engines Turbocharger Oil Lines
345D, 349D and 349D2 Excavator Machine System Specifications Pilot Lines - Stick Lowering Control
797F and 797F XQ Off-Highway Truck Braking System Solenoid Valve (Rear Axle Motor Unloader)
797F and 797F XQ Off-Highway Truck Braking System Solenoid Valve (Brake Cooling)
Procedure to Apply Dielectric Grease to the Horn (Cruise Control) Contact Ring{4310} Procedure to Apply Dielectric Grease to the Horn (Cruise Control) Contact Ring{4310}
3508C, 3512C, and 3516C Locomotive Engines Protection Override - Test
C13 Industrial Engines Turbocharger
G3304B and G3306B Engines Cylinder Head - Remove
G3512E Generator Set Engine Component Location
C6.6 Industrial Engine Engine Valve Lash - Inspect
3508C, 3512C and 3516C Locomotive Engines Turbocharger
3500 Engines Thermocouple
3508C, 3512C, and 3516C Locomotive Engines Injector Solenoid - Test
G3304B and G3306B Engines Cylinder Head - Install
3508C, 3512C, and 3516C Locomotive Engines Overspeed Verify - Test
Caterpillar On-Highway Diesel Engine Fluids Recommendations Biodiesel
C13 Industrial Engines Turbocharger
G3304B and G3306B Engines Connecting Rod Bearings - Remove and Install
3508C, 3512C, and 3516C Locomotive Engines Sensor Signal (PWM) - Test
3508C, 3512C, and 3516C Locomotive Engines Sensor Signal (Analog, Active) - Test
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Boom - 6.90 m (22.638 ft)
G3304B and G3306B Engines Piston and Connecting Rods - Remove
C13 Engine for Combat and Tactical Vehicles Engine Oil Cooler