Turbocharger Oil Lines
Show/hide table
| |
| Illustration 1 | g02829377 |
|
Rear view of engine | |
Show/hide table
| Specification for 341-1860 Turbocharger Oil Lines Gp | |||
| Item | Qty | Part | Specification description |
| 1 | 4 | 6V-5134 O-Ring Seal | Lightly lubricate the bore with the lubricant that is being sealed or an approved equivalent. |
| 2 | 4 | 0L-1143 Bolt | Before assembly, apply Loctite C5A Copper anti-seize to the threads and the bearing surfaces. |
| 3 | 3 | 228-7091 O-Ring Seal | Lubricate the bore with glycerin or an approved equivalent. |
Caterpillar Information System:
345D, 349D and 349D2 Excavator Machine System Specifications Pilot Lines - Stick Lowering Control
797F and 797F XQ Off-Highway Truck Braking System Solenoid Valve (Rear Axle Motor Unloader)
797F and 797F XQ Off-Highway Truck Braking System Solenoid Valve (Brake Cooling)
Procedure to Apply Dielectric Grease to the Horn (Cruise Control) Contact Ring{4310} Procedure to Apply Dielectric Grease to the Horn (Cruise Control) Contact Ring{4310}
3508C, 3512C, and 3516C Locomotive Engines Protection Override - Test
C13 Industrial Engines Turbocharger
G3304B and G3306B Engines Cylinder Head - Remove
G3512E Generator Set Engine Component Location
C6.6 Industrial Engine Engine Valve Lash - Inspect
3508C, 3512C and 3516C Locomotive Engines Turbocharger
3508C, 3512C and 3516C Locomotive Engines Exhaust Shield
3508C, 3512C and 3516C Locomotive Engines Exhaust Manifold
2009/08/24 New Fuel Injection Lines {1251, 1252}
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Pilot Lines
3500 Engines Thermocouple
3508C, 3512C, and 3516C Locomotive Engines Injector Solenoid - Test
G3304B and G3306B Engines Cylinder Head - Install
3508C, 3512C, and 3516C Locomotive Engines Overspeed Verify - Test
Caterpillar On-Highway Diesel Engine Fluids Recommendations Biodiesel
C13 Industrial Engines Turbocharger
G3304B and G3306B Engines Connecting Rod Bearings - Remove and Install
3508C, 3512C, and 3516C Locomotive Engines Sensor Signal (PWM) - Test
3508C, 3512C, and 3516C Locomotive Engines Sensor Signal (Analog, Active) - Test
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Boom - 6.90 m (22.638 ft)