Turbocharger
Show/hide table
Illustration 1 | g02829576 |
Show/hide table
Illustration 2 | g02829577 |
Rear view (3) Tightening sequence for 6V-6753 High Temperature Bolt |
Show/hide table
Specification for 321-5641 Turbocharger Gp | |||
Item | Qty | Part | Specification description |
1 | 1 | 249-6695 Clamp As | Use the following procedure to tighten the clamp assembly:
1. Tighten to 2. Gently tap around the clamp assembly with a soft faced hammer. 3. Again, tighten to |
2 | 1 | 9N-2038 Turbine Clamp As | Use the following procedure to tighten the turbine clamp assembly:
1. Tighten to 2. Gently tap around the turbine clamp assembly with a soft faced hammer. 3. Again, tighten to |
3 | 8 | 6V-6753 High Temperature Bolt | Before assembly, apply Loctite C5A Copper anti-seize to the threads and the bearing surfaces. |
Use the following procedure in order to tighten the high temperature bolts of the half flange:
1. Tighten bolts 1 in any sequence to 2. Tighten bolts 2 in any sequence to |
|||
4 | 8 | 2N-2765 High Temperature Bolt | Before assembly, apply Loctite C5A Copper anti-seize to the threads and the bearing surfaces. |
Torque to |
Caterpillar Information System:
3508C, 3512C and 3516C Locomotive Engines Exhaust Shield
3508C, 3512C and 3516C Locomotive Engines Exhaust Manifold
G3512E Generator Set Engine Electrical Connectors
3516B Engine for 994F and 994H Wheel Loaders Electronic Service Tool Does Not Communicate
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Battery Disconnect Switch - If Equipped
2009/08/03 The Connector for the Chassis Harness and the Platform Harness Should Be Tightened to the Specified Torque on Certain Excavators {1408}
2009/08/03 A New Bolt Is Used on the Valve Mechanism Gp of All 3500 Machine Engines {1102, 1107, 1120, 1121, 1123, 1209}
C18 Industrial Engine Aftercooler - Test
C13 Industrial Engines Turbocharger
793F and 797F Off-Highway Trucks Chassis Electronic Control System Glossary of Electrical Terms
2009/08/10 Diagnostic Publications for the Systems of the Hydraulic Electronic Unit Injector (HEUI) have been Updated {1100, 1126, 1250, 1251, 1261, 1290}
2009/08/01 Diagnostic Publications for the Systems of the Hydraulic Electronic Unit Injector (HEUI) have been Updated {1100, 1126, 1250, 1251, 1261, 1290}
C6.6 Industrial Engine Engine Valve Lash - Inspect
G3512E Generator Set Engine Component Location
G3304B and G3306B Engines Cylinder Head - Remove
C13 Industrial Engines Turbocharger
3508C, 3512C, and 3516C Locomotive Engines Protection Override - Test
Procedure to Apply Dielectric Grease to the Horn (Cruise Control) Contact Ring{4310} Procedure to Apply Dielectric Grease to the Horn (Cruise Control) Contact Ring{4310}
797F and 797F XQ Off-Highway Truck Braking System Solenoid Valve (Brake Cooling)
797F and 797F XQ Off-Highway Truck Braking System Solenoid Valve (Rear Axle Motor Unloader)
345D, 349D and 349D2 Excavator Machine System Specifications Pilot Lines - Stick Lowering Control
3508C, 3512C and 3516C Locomotive Engines Turbocharger Oil Lines
2009/08/24 New Fuel Injection Lines {1251, 1252}
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Pilot Lines