C9.3 Engines for Caterpillar Built Machines Caterpillar


Nozzle Heater Harness - Remove and Install - Harness Assembly

Usage:

336E L BMH

拆卸步骤

表 1
所需工具    
工具     零件号     零件描述     数量    
A.     195-4609     油封钩     1    
B     -     异丙醇     -    



    图 1g02153649

  1. 断开线束组件 (1) ,然后拆下电缆扎带 (2) 。

    注: 实际的加热喷嘴是燃烧盖的组成部分并且不可维修,因此此处没显示加热喷嘴。

  1. 拆下六角螺栓 (4) 和卡箍组件。 拆下连接至加热喷嘴(未显示加热喷嘴)的线束组件 (3) 。



    图 2g02480016

  1. 使用工具 (A) 拆下 O 形密封圈 (5) 和 (6) 。 废弃 O 形密封圈。

安装步骤

  1. 按照相反顺序安装线束组件 (3) 。

      ------ WARNING! ------

      使用异丙醇时小心从事。 避免长时间皮肤接触异丙基乙醇。

      如果吸入蒸汽,可能会导致人身伤害。只能在通风良好的地方使用。使用异丙醇时不要吸烟。

      异丙醇易燃。 不要在明火或焊接作业附近使用。使异丙醇远离超过 482°C (900°F) 的加热表面。


      注: 该连接是电气连接,而且不能使用石油基润滑剂进行润滑。 异丙醇是适用于此连接的唯一经过认可的润滑剂。

    1. 安装之前,用工具 (B) 润滑新 O 形密封圈 (5) 和 (6) 。

Caterpillar Information System:

Quick Start Guide for Auto Paralleling{4450, 7451} Quick Start Guide for Auto Paralleling{4450, 7451}
G3512E Generator Set Engine Configuration Parameters
2009/09/07 Updated Information on the Starter Motor Mag Switch (SMMS) for Electronic Controlled Marine Engines {1424, 1453, 7499}
3500 Engines Aftercooler - Remove and Install
G3512E Generator Set Engine Diagnostic Trouble Codes
G3300 Engines Manual Stop Procedure
C9.3 Engines for Caterpillar Built Machines Combustion Head - Remove and Install - Clean Emissions Module
C9.3 Engines for Caterpillar Built Machines Air Control Valve - Remove and Install
C9.3 Engines for Caterpillar Built Machines Relay (ARD Nozzle Heater) - Remove and Install - Clean Emissions Module
C9.3 Engines for Caterpillar Built Machines Ignition Coil - Remove and Install - Clean Emissions Module
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 0766 - FMI 02
CX31-P600 Petroleum Transmission Well Servicing Engine, Torque Converter and Transmission - Connect
C3.4B Engines for Caterpillar Built Machines Piston Ring Groove - Inspect
C4.4 Industrial Engine Piston Height - Inspect
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System Machine Does Not Move
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System Hoist Does Not Function
C13, C15, and C18 Tier 4 Interim Engines Sensor Supply - Test
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System Machine Pulls to Side During Braking
793F CMD (Conversion) Off-Highway Truck Braking System Parking Brake Does Not Hold
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System Transmission Shift Is Harsh
793F and 797F Off-Highway Trucks Power Train Electronic Control System Transmission Does Not Shift
793F and 797F Off-Highway Trucks Power Train Electronic Control System Rear Axle Oil Temperature Is High
793F and 797F Off-Highway Trucks Power Train Electronic Control System Power Train Has Unusual Noise
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Air Starting System
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.