C175-16 Marine Propulsion Engines Caterpillar


Component Location

Usage:

C175-16 M6A

Block Diagrams for C175 Engines

Components for Primary ECM Control




Illustration 1g03687093

Components for the Secondary (Redundant) ECM Control




Illustration 2g03687096

Locations of the Engine Sensors




Illustration 3g02438696

Locations of the engine sensors (right side engine view)

(1) Intake manifold pressure sensor (RH)

(2) Intake manifold temperature sensor (RH)

(3) Position sensor for the right air shutoff

(4) Air shutoff solenoid

(5) Fuel transfer pressure sensor (unfiltered)

(6) Fuel temperature sensor for the low-pressure fuel

(7) Fuel transfer pressure sensor (filtered)

(8) Fuel transfer pressure sensor for the secondary ECM (filtered)

(9) Right rail connector

(10) Crankcase pressure sensor

(11) Temperature Control Module (TCM) for the separate circuit aftercooler system

(12) Pressure sensor at the water pump outlet for the separate circuit aftercooler system

(13) Temperature sensor at the water pump outlet for the separate circuit aftercooler system

(14) Controller for the Fuel Control Valve (FCV) (primary ECM)

(15) Leak detection sensor for the high-pressure fuel rail

(16) Temperature sensor for the high-pressure fuel system

(17) Controller for the FCV (secondary ECM)

(18) Electric fuel priming pump




Illustration 4g02438977

Locations of the engine sensors (top side engine view)

(19) Secondary speed/timing sensor (RH)

(20) Tertiary speed/timing sensor (LH)

(21) Sensor for the right turbocharger turbine inlet temperature

(22) Sensor for the left turbocharger turbine inlet temperature

(23) Right turbocharger compressor inlet pressure sensor (No. 2)

(24) Left turbocharger compressor inlet pressure sensor (No. 1)

(25) Secondary fuel rail pressure sensor

(26) Inlet air temperature

(27) Fuel rail pressure sensor

(28) Temperature Control Module (TCM) for the jacket water cooling system

(29) Filtered oil temperature sensor

(30) Secondary filtered oil temperature sensor

(31) Filtered oil pressure sensor

(32) Secondary filtered oil pressure sensor

(33) Unfiltered oil pressure sensor




Illustration 5g02438978

Locations of the engine sensors (left side engine view)

(34) Control box connector for the front harness

(35) Left rail connector

(36) Primary power connector

(37) Secondary power connector

(38) Position sensor for the left air shutoff

(39) Service tool connector

(40) Engine interface connector

(41) Intake manifold pressure sensor (LH)

(42) Intake manifold temperature sensor (LH)

(43) Coolant pump outlet temperature sensor

(44) Low current power distribution panel

(45) High current power distribution panel

(46) Primary speed/timing sensor




Illustration 6g02725050

Locations of the engine sensors (front side engine view)

(47) Secondary atmospheric pressure sensor

(48) Control assembly (diode box)

(49) Atmospheric pressure sensor

(50) ECM (Primary)

(51) Secondary ECM

(52) Temperature Control Module (TCM)

(53) Coolant pressure sensor for the engine block inlet

(54) Secondary coolant pressure sensor for the engine block inlet

(55) Solenoid for the prelubrication pump

(56) Coolant pressure sensor for the engine block outlet

(57) Secondary coolant temperature sensor for the engine block outlet

(58) Coolant temperature sensor for the engine block outlet

Caterpillar Information System:

C175-16 Marine Propulsion Engines System Overview
C175-16 and C175-20 Generator Set Engines Engine Stalls Immediately After Starting
345D, 349D and 349D2 Excavator Machine System Specifications Fan Drive Mounting Group
C175-16 and C175-20 Generator Set Engines Fuel Pressure Is High - Fuel Transfer System
C175-16 and C175-20 Generator Set Engines Fuel Pressure Is Low - Fuel Transfer System
2009/04/06 New Software Is Available for C18 Marine Engines {1901, 1920}
CX35-P800 Petroleum Transmission and Petroleum Power Train Packages Pump Drive - Assemble
CX35-P800 Petroleum Transmission and Petroleum Power Train Packages Pump Drive - Disassemble
2009/03/30 Introduction of a New Fuel Filter Base {1260, 1261}
2009/02/09 Improvement to the Oil Pressure Switch {7400, 7421}
2009/03/02 Pressure Requirements for the Fuel Supply of the C175 Engine {1250}
2011/09/12 A New Rocker Arm Assembly Is Available {1123}
C175-16 Marine Propulsion Engines Electrical Connectors
C175-16 Marine Propulsion Engines Event Codes
C18 Industrial Engine Engine Oil Pan
XQ175 Rental Generator Set Setup
2009/02/09 Improved Fuel Transfer Pump {1256}
C13 On-Highway Engines Fuel System
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204} Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
793F and 797F Off-Highway Trucks Power Train Electronic Control System Normal Operation
PMG3516 Power Module Valve Stem Projection - Measure/Record
C18 Industrial Engine Air Lines
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Hydraulic Filter and Lines Gp
2009/02/16 Important Notice on Installation of Crankshaft Seals and Wear Sleeves {1160, 1161}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.