Track
Show/hide table
| |
| Illustration 1 | g03656448 |
|
Typical example | |
Show/hide table
| Specification for 297-0129 Track Link As and 297-0130 Track Link As | |||
| Item | Qty | Part | Specification Description |
| - | - | - | All joints of the link assembly must have flexibility even with a measurable end play of zero. Flexibility is the ability for movement from the weight of the link assembly. |
| - | - | - | Use the following procedure to tighten the track bolts:
1. Tighten the track bolts to 2. Tighten the bolts to an additional 120 ± 5 degrees. |
| - | - | - | The maximum assembly force for the link assembly is |
| - | - | - | The assembly force for the master pin (1) is |
| A | - | - | Protrusion for the master bushing on each end is |
| B | - | - | Protrusion for the pin on each end is |
| C | - | - | Distance between the bolt holes is |
| D | - | - | Distance between the bolt holes is |
Caterpillar Information System:
345D, 349D and 349D2 Excavator Machine System Specifications Main Control Valve
C175-16 and C175-20 Engines for Off-Highway Trucks Histogramming
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System General Information
2009/01/26 Pushrods {1102, 1121, 1123, 1209}
390D Excavator Machine System Specifications Sprocket
3516C Generator Set Engines Engine Mount
C27 and C32 Generator Set Engines Fan Drive
3516C Generator Set Engines Water Lines
3500 Engines Water Lines
C7 Engines for Combat and Tactical Vehicles Noise from Injectors with Keyswitch ON
C7 Engines for Combat and Tactical Vehicles Ignition Keyswitch Circuit and Battery Supply Circuit - Test
CX35-P800 Petroleum Transmission and Petroleum Power Train Packages Transmission and Torque Converter - Connect
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System System Operation
Configuring the Active Power Control (APC) Parameter for the Uninterruptible Power Supply ( UPS ){4480} Configuring the Active Power Control (APC) Parameter for the Uninterruptible Power Supply ( UPS ){4480}
2009/01/26 An Operating Parameter Is Now Required During Start-up {4480}
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Return Lines (Boom Lowering Control)
3500 Engines for Caterpillar Built Generator Sets Fuel Injector
349F and 352F Excavators Machine System Specifications Counterweight Cylinder
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Accumulator - Remove
C27 and C32 Generator Sets Belts - Inspect/Adjust/Replace
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System Diagnostic Operation
793F Off-Highway Truck Braking System - Test
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Accumulator - Install
2009/02/09 A New Connecting Rod Bearing is Available {1218, 1219, 1225}