Sprocket
Show/hide table
| |
| Illustration 1 | g06267174 |
Show/hide table
| Specification for 145-3014 Sprocket Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 28 | 461-3890 Bolt | Before assembly, remove compound, oil and dust from female threads, then apply blue Loctite 243 to threads.
Use the following tightening procedure: 1. Tighten bolts to 2. Turn to an additional angle of 45 ± 5 degrees. |
Caterpillar Information System:
3516C Generator Set Engines Engine Mount
C27 and C32 Generator Set Engines Fan Drive
3516C Generator Set Engines Water Lines
3500 Engines Water Lines
C7 Engines for Combat and Tactical Vehicles Noise from Injectors with Keyswitch ON
C7 Engines for Combat and Tactical Vehicles Ignition Keyswitch Circuit and Battery Supply Circuit - Test
CX35-P800 Petroleum Transmission and Petroleum Power Train Packages Transmission and Torque Converter - Connect
CX35-P800 Petroleum Transmission and Petroleum Power Train Packages Transmission and Torque Converter - Separate
Some Engines Are Being Removed from Service Letter, PI10723{1061} Some Engines Are Being Removed from Service Letter, PI10723{1061}
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System System Schematic
2009/01/26 A New Bracket Is Now Used for the Fuel Actuator {1265}
PM3516 Power Modules Maintenance Recommendations
2009/01/26 Pushrods {1102, 1121, 1123, 1209}
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System General Information
C175-16 and C175-20 Engines for Off-Highway Trucks Histogramming
345D, 349D and 349D2 Excavator Machine System Specifications Main Control Valve
390D Excavator Machine System Specifications Track
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System System Operation
Configuring the Active Power Control (APC) Parameter for the Uninterruptible Power Supply ( UPS ){4480} Configuring the Active Power Control (APC) Parameter for the Uninterruptible Power Supply ( UPS ){4480}
2009/01/26 An Operating Parameter Is Now Required During Start-up {4480}
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Return Lines (Boom Lowering Control)
3500 Engines for Caterpillar Built Generator Sets Fuel Injector
349F and 352F Excavators Machine System Specifications Counterweight Cylinder
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Accumulator - Remove