Front Housing and Covers
Show/hide table
Illustration 1 | g01622328 |
Alignment |
The front housing must be aligned to the cylinder block face. ... +0.05 to minus 0.05 mm (+ 0.0020 to minus 0.0020 inch )
Show/hide table
Illustration 2 | g01622330 |
Typical example |
Tighten the setscrews for the front housing in the sequence that is shown in illustration 2. Torque for the setscrews ... 28 N·m (20 lb ft)
Show/hide table
Illustration 3 | g01624059 |
Typical example |
Tighten the setscrews for the front cover and the water pump in the sequence that is shown in illustration 3. Torque for the setscrews ... 22 N·m (16 lb ft)
Caterpillar Information System:
C6.6 Marine Generator Set Piston and Rings
3408E and 3412E Engines for Caterpillar Built Machines Fuel Temperature Sensor
2009/03/09 An Improved Auxiliary Sea Water Pump Is Available {1371}
325 VARIABLE UNDERCARRIAGE VH Undercarriage/VM Undercarriage Hydraulic System Relief Valve (Travel Motor) - Test and Adjust - VH Undercarriage
2008/08/18 Two New V-Belt Sets for the Fan Drive on the C32 are Available {1357, 1359}
2008/08/25 New Cylinder Liners and O-ring Seals are Used {1201, 1216}
G3412C, G3508, G3512 and G3516 Engines Status Control Module 09 dIAG
3412, 3412C, and 3412E Generator Set Engines System Overview
G3412C, G3508, G3512 and G3516 Engines Status Control Module 07 dIAG
2008/08/18 An Improved Top Piston Ring Is Used {1214, 1215}
New Secondary Fuel Filter{1261} New Secondary Fuel Filter{1261}
G3412C, G3508, G3512 and G3516 Engines Status Control Module 06 dIAG
3512B Generator Set Engine Engine Monitoring System
3412, 3412C, and 3412E Generator Set Engines ECM - Replace
C6.6 Marine Generator Set Gear Group (Front)
C6.6 Marine Generator Set Flywheel
3412, 3412C, and 3412E Generator Set Engines ECM Software - Install
325 VARIABLE UNDERCARRIAGE VH Undercarriage/VM Undercarriage Hydraulic System Pressure Reducing Valve (Travel Parking Brake) - Test and Adjust - VH Undercarriage
3408E and 3412E Engines for Caterpillar Built Machines Electrical Connectors - Inspect
A Software Update for Turbocharger Surge on C18 Industrial Engines Is Now Available{1901, 7620} A Software Update for Turbocharger Surge on C18 Industrial Engines Is Now Available{1901, 7620}
325 Variable Undercarriage VH Undercarriage/VM Undercarriage Hydraulic System Main Hydraulic System - VM Undercarriage
320 Variable Gauge OEM Undercarriage Hydraulic System Undercarriage Cylinder (Adjustable Gauge) - VM Undercarriage
3412, 3412C, and 3412E Generator Set Engines Electrical Connectors
Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders {7050, 7051, 7065, 7066} Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders {7050, 7051, 7065, 7066}