Customer Specified Parameters Table
Show/hide table
Customer Specified Parameters     | ||
---|---|---|
ECM Parameter     | Possible Values     | Default Value     |
Engine Rating Parameter     | ||
"Rating Number"     | 1 to 4     | 1     |
ECM Identification Parameter     | ||
"Equipment ID"     | 17 Digits Available characters are dependent on the service tool that is used     |
Not Programmed     |
Miscellaneous     | ||
"Monitoring Mode Shutdowns"     | Disabled Enabled     |
Disabled     |
J1939 Continuous Fault Handling     | ||
"Remote Torque Speed Control Enable Status"     | Disabled Enabled     |
Disabled     |
Configurable Inputs     | ||
"Overspeed Protection"     | 1500 to 2100 rpm     | 2100 rpm     |
"Configurable Governor Droop"     | 0% to 8%     | 0%     |
"User Defined Switch Installation Status"     | Not Installed Installed J1:48     |
Not Installed     |
Caterpillar Information System:
793F and 797F Off-Highway Trucks Braking System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
C32 Marine Engine Model View Illustrations
374F Excavator Machine System Solenoid Valve (Auxiliary Control)
C6.6 Marine Generator Set Customer Specified Parameters
SR5 Electric Power Generation Front Bracket - Remove and Install
SR5 Electric Power Generation End Bracket - Install
SR5 Electric Power Generation End Bracket - Remove
2008/07/01 New Primary Fuel Filters and Fuel Filter Bases are Now Available {1261, 1262, 1263}
2008/06/30 New Primary Fuel Filters are Now Available {1261, 1263}
Replacement of the Double Notch Piston Skirts on C9 Engines{1225} Replacement of the Double Notch Piston Skirts on C9 Engines{1225}
2008/11/03 A New Single Notched Piston Skirt Is Now Used {1225}
C18 Generator Set Model View Illustrations
C6.6 Marine Generator Set Customer Specified Parameters Worksheet
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Filter Base
C6.6 Marine Generator Set Magnetic Pickups - Clean/Inspect
G3304B and G3306B Engines Symptom Troubleshooting
3508, 3512, and 3516 Generator Sets Generator Bearing - Replace
New Repair Procedure for the Purge Pump{107P} New Repair Procedure for the Purge Pump{107P}
C32 Petroleum Generator Sets Generator Bearing Temperature - Test/Record
C6.6 Marine Generator Set Coolant Temperature Is Too High - Radiator Cooling System
G3412C, G3508, G3512 and G3516 Engines Status Control Module General Information
3500 Generator Sets Generator Bearing - Inspect/Replace - LC6/LC7Generator
320 Variable Gauge OEM Undercarriage Hydraulic System General Information
325 Variable Undercarriage VH Undercarriage/VM Undercarriage Hydraulic System Main Hydraulic System - VH Undercarriage