New Repair Procedure for the Purge Pump{107P} Caterpillar


New Repair Procedure for the Purge Pump{107P}

Usage:

C15 B5R
Engine:
C13 (S/N: LEE1-UP)
C15 (S/N: SDP1-UP; B5R1-UP)

Introduction

The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.

Problem

Complete purge pumps are being replaced when the service kit 304-9994 Air Pump Gp can be used. The complete purge pump, either part number 297-7223 Air Pump Gp or 304-9992 Air Pump Gp are no longer available.

Solution

Low purge pressures or high purge pressures do not justify a complete replacement of the purge pump.

In most scenarios, the 304-9994 Air Pump Gp will repair the purge system. Repair with a complete purge pump is only necessary in the case of an electrical issue with the purge pump.

For 2007 heavy-duty diesel truck engines, use Special Instruction, REHS3822 if the troubleshooting procedure requires replacement of the complete purge pump. Do not use Special Instruction, REHS3822 when a service kit can be utilized.

If the troubleshooting guide recommends replacement of the complete purge pump and Special Instruction, REHS3822 is followed, the repair can be reimbursed through warranty provided that the engine is still eligible for warranty.

Note: If Special Instruction, REHS3822 is used, list the part that causes the failure as the 304-9992 Air Pump Gp or the 297-7223 Air Pump Gp . These parts have been recalled in order to analyze the failed components.

Caterpillar Information System:

3508, 3512, and 3516 Generator Sets Generator Bearing - Replace
G3304B and G3306B Engines Symptom Troubleshooting
C6.6 Marine Generator Set Magnetic Pickups - Clean/Inspect
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Filter Base
C6.6 Marine Generator Set Customer Specified Parameters Worksheet
C6.6 Marine Generator Set Customer Specified Parameters Table
793F and 797F Off-Highway Trucks Braking System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
C32 Marine Engine Model View Illustrations
374F Excavator Machine System Solenoid Valve (Auxiliary Control)
C6.6 Marine Generator Set Customer Specified Parameters
SR5 Electric Power Generation Front Bracket - Remove and Install
SR5 Electric Power Generation End Bracket - Install
C32 Petroleum Generator Sets Generator Bearing Temperature - Test/Record
C6.6 Marine Generator Set Coolant Temperature Is Too High - Radiator Cooling System
G3412C, G3508, G3512 and G3516 Engines Status Control Module General Information
3500 Generator Sets Generator Bearing - Inspect/Replace - LC6/LC7Generator
320 Variable Gauge OEM Undercarriage Hydraulic System General Information
325 Variable Undercarriage VH Undercarriage/VM Undercarriage Hydraulic System Main Hydraulic System - VH Undercarriage
325 Variable Undercarriage VH Undercarriage/VM Undercarriage Hydraulic System Travel Hydraulic System - VH Undercarriage
325 Variable Undercarriage VH Undercarriage/VM Undercarriage Hydraulic System Oil Makeup (Travel System) - VH Undercarriage
Extended Life Coolant (ELC) Exhibiting Nitrite Depletion in Machines Equipped with Aluminum Radiators {1352, 1395} Extended Life Coolant (ELC) Exhibiting Nitrite Depletion in Machines Equipped with Aluminum Radiators {1352, 1395}
3512C and 3516C Marine Auxiliary and Generator Set Engines Engine Mounts - Inspect - If Equipped
G3412C, G3508, G3512 and G3516 Engines Status Control Module Status Control Module
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Set Alignment - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.