Piston Motor (Winch) - Remove and Install
Start By:
- Connect the steering frame lock.
- Release the system pressure.
Show/hide table
 |
|
Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system. Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. |
- Remove four bolts (2) and cover assembly (1).
Show/hide table
Illustration 2 g06234286 - Disconnect tube assemblies (3) and (4).
- Disconnect harness assemblies (5).
Show/hide table
Illustration 3 g06234297 - Attach a suitable lifting device to piston motor (winch) (7). The weight of piston motor (winch) (7) is approximately
50 kg (110 lb) . - Remove four bolts (6), piston motor (winch) (7), and the gasket (not shown).
Show/hide table
| |
| Illustration 1 | g06234280 |
- Install piston motor (winch) (7) in the reverse order of removal.
Caterpillar Information System:
320GC, 320 and 323 Excavators Machine Systems Cab - Remove and Install
Procedure to Install the Bluetooth Receiver Kit on Certain 320 GC, 330 GC, 336 GC and 345 GC Excavators {7008} Procedure to Install the Bluetooth Receiver Kit on Certain 320 GC, 330 GC, 336 GC and 345 GC Excavators {7008}
A Lifting Eye Quality Issue Exists for Certain 3500 Engines {1122} A Lifting Eye Quality Issue Exists for Certain 3500 Engines {1122}
Procedure to Update the Transmission Oil Cooler Hoses on Certain 631K and 637K Wheel Tractor-Scrapers {1375, 7554} Procedure to Update the Transmission Oil Cooler Hoses on Certain 631K and 637K Wheel Tractor-Scrapers {1375, 7554}
973K Track-Type Loader Machine Systems Bucket Lever and Link - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Specifications Control Valve (Auxiliary)
C32 Marine Engines Aftercooler - Remove
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Electrohydraulic System Transfer Drive System Troubleshooting
320 GC, 320 and 323 Excavator Machine Systems Specifications Main Control Valve
621K, 623K and 627K Wheel Tractor-Scrapers Machine Systems Steering Control Valve - Assemble
An Improved Bolted Joint Is Now Used On The Rear Cab Mounting Bolts On Certain 953D, 963D, 963K, and 973K Track-Type Loaders {7266, 7301} An Improved Bolted Joint Is Now Used On The Rear Cab Mounting Bolts On Certain 953D, 963D, 963K, and 973K Track-Type Loaders {7266, 7301}
C32 Tier 4 Final Marine Engines Catalyst (SCR) - Remove and Install
MD6310 Rotary Drill Lifting and Tying Down the Machine
C32 Marine Engines Water Temperature Regulator - Remove and Install
MD6250 and MD6310 Rotary Drills ECM Location Code - Test
320GC, 320 and 323 Excavators Machine Systems Pump Drive Coupling - Remove and Install
854K Wheel Dozer Pilot Hydraulic System
330 GC and 330 Excavator Maintenance Interval Schedule
3512E Tier 4 Final Engines for Land Electric Drilling Crankcase Breather - Valve Cover Integrated Breathers with Closed Crankcase Ventilation
MD6250 Rotary Drill Systems Travel Parking Brake
854K Wheel Dozer Piston Pump (Implement)
854K Wheel Dozer Oil Filter (Hydraulic)
C32 Marine Engines Expansion Tank - Remove and Install
330, 330GC Hydraulic Excavator Engine Supplement Water Temperature Regulator - Remove and Install