Hydraulic Tank and Mounting
Show/hide table
| |
| Illustration 1 | g06225364 |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 1 | 1 | 358-9475 Valve As | Torque to |
Caterpillar Information System:
The Engine Oil Filter Group is Improved on Certain 627K and 637K Wheel Tractor Scrapers {1306, 1308} The Engine Oil Filter Group is Improved on Certain 627K and 637K Wheel Tractor Scrapers {1306, 1308}
C9.3B Engines for Caterpillar Built Machines Belt Tensioner - Remove and Install
MD6200 Rotary Drill Fuses - Replace
C9.3B Engines for Caterpillar Built Machines Inlet Manifold Pressure Sensor - Remove and Install
Next Generation Hydraulic Excavator Monitoring System Prestart Monitoring Function
A New Spacers in the Steering Cylinder Group Are Now Used on Certain Wheel Skidders {4303} A New Spacers in the Steering Cylinder Group Are Now Used on Certain Wheel Skidders {4303}
330 GC and 330 Excavator Diesel Exhaust Fluid Injector - Replace - C7.1 Engine
990K Wheel Loader Systems Exhaust Lines
990K Wheel Loader Systems Final Drive and Wheel
AD22 Underground Articulated Truck Braking System Brake Cooling Pressure - Check
AD22 Underground Articulated Truck Braking System Brake Disc Wear - Check
AD22 Underground Articulated Truck Braking System Braking System Air - Purge
854K Wheel Dozer Systems Oil Filter (Case Drain)
854K Wheel Dozer Systems Oil Filter (Hydraulic) - Fan
844K Wheel Dozer Systems Lift Cylinder
D9R Track-Type Tractor Systems Bulldozer Tilt Cylinder
986K Wheel Loader Systems Oil Filter (Hydraulic) - Pilot Lines
D9R Track-Type Tractor Systems Bulldozer Tilt Cylinder
844K Wheel Dozer Systems Steering Control
A Turbocharger Inlet Hose Heat Shield Is Now Used on Certain 930K and 938K Wheel Loaders {1067, 1071} A Turbocharger Inlet Hose Heat Shield Is Now Used on Certain 930K and 938K Wheel Loaders {1067, 1071}
MD6250 Rotary Drill Systems Location of Components
320, 323 Excavator Engine Supplement Fuel Filter and Base - Remove and Install
Inertial Measurement Unit (IMU) Sensors are Now Isolation Mounted on Certain 631K and 637K Wheel Tractor-Scrapers {1408, 1439} Inertial Measurement Unit (IMU) Sensors are Now Isolation Mounted on Certain 631K and 637K Wheel Tractor-Scrapers {1408, 1439}
Improved Shaft Bearings for Drive Pumps are Now Used on Certain D6K and D6K2 Track-Type Tractors, and 953D Track-Type Loaders {3203, 5070} Improved Shaft Bearings for Drive Pumps are Now Used on Certain D6K and D6K2 Track-Type Tractors, and 953D Track-Type Loaders {3203, 5070}