Bulldozer Tilt Cylinder
Show/hide table
| |
| Illustration 1 | g06225482 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 1 | 1 | 167-2228 Buffer Seal As | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 2 | 1 | 167-2346 U-Cup Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 3 | 1 | 225-3294 Wiper Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 4 | - | - | Before assembly, apply green Loctite Retaining Compound 638 to the wiper seal groove. |
| 5 | 1 | 9X-6018 Locknut | Before assembly, lubricate the threads.
Torque to |
| A | 1 | 491-0983 Cylinder As | Bore is |
| B | 1 | 491-0984 Rod As | Diameter is |
| C | 1 | 303-2003 Head | Bore over four lands is |
| 6 | 2 | 8T-0370 Bolt | Torque to |
| 7 | 6 | 8C-3411 Bolt | Torque to |
Caterpillar Information System:
844K Wheel Dozer Systems Lift Cylinder
854K Wheel Dozer Systems Oil Filter (Hydraulic) - Fan
854K Wheel Dozer Systems Oil Filter (Case Drain)
854K Wheel Dozer Systems Hydraulic Tank and Mounting
The Engine Oil Filter Group is Improved on Certain 627K and 637K Wheel Tractor Scrapers {1306, 1308} The Engine Oil Filter Group is Improved on Certain 627K and 637K Wheel Tractor Scrapers {1306, 1308}
C9.3B Engines for Caterpillar Built Machines Belt Tensioner - Remove and Install
MD6200 Rotary Drill Fuses - Replace
C9.3B Engines for Caterpillar Built Machines Inlet Manifold Pressure Sensor - Remove and Install
Next Generation Hydraulic Excavator Monitoring System Prestart Monitoring Function
A New Spacers in the Steering Cylinder Group Are Now Used on Certain Wheel Skidders {4303} A New Spacers in the Steering Cylinder Group Are Now Used on Certain Wheel Skidders {4303}
330 GC and 330 Excavator Diesel Exhaust Fluid Injector - Replace - C7.1 Engine
990K Wheel Loader Systems Exhaust Lines
986K Wheel Loader Systems Oil Filter (Hydraulic) - Pilot Lines
D9R Track-Type Tractor Systems Bulldozer Tilt Cylinder
844K Wheel Dozer Systems Steering Control
A Turbocharger Inlet Hose Heat Shield Is Now Used on Certain 930K and 938K Wheel Loaders {1067, 1071} A Turbocharger Inlet Hose Heat Shield Is Now Used on Certain 930K and 938K Wheel Loaders {1067, 1071}
MD6250 Rotary Drill Systems Location of Components
320, 323 Excavator Engine Supplement Fuel Filter and Base - Remove and Install
Inertial Measurement Unit (IMU) Sensors are Now Isolation Mounted on Certain 631K and 637K Wheel Tractor-Scrapers {1408, 1439} Inertial Measurement Unit (IMU) Sensors are Now Isolation Mounted on Certain 631K and 637K Wheel Tractor-Scrapers {1408, 1439}
Improved Shaft Bearings for Drive Pumps are Now Used on Certain D6K and D6K2 Track-Type Tractors, and 953D Track-Type Loaders {3203, 5070} Improved Shaft Bearings for Drive Pumps are Now Used on Certain D6K and D6K2 Track-Type Tractors, and 953D Track-Type Loaders {3203, 5070}
How to Check SCV Current in Cat Electronic Technician (ET) on Certain C3.3B Tier IV Final and C3.8 Tier IV Interim Engines {1920} How to Check SCV Current in Cat Electronic Technician (ET) on Certain C3.3B Tier IV Final and C3.8 Tier IV Interim Engines {1920}
The Differential Filler Group is Improved on Certain 631K and 637K Wheel Tractor-Scrapers {3005, 3258, 5057} The Differential Filler Group is Improved on Certain 631K and 637K Wheel Tractor-Scrapers {3005, 3258, 5057}
320 GC, 320 and 323 Excavator Machine Systems Specifications Hydraulic Tank and Mounting
AD22 Underground Articulated Truck Operation