Illustration 1 | g03717076 |
The cushion-hitch pump is an axial piston type pump which is mounted to the steering pump on the front of the transfer case at the rear of the tractor. The cushion-hitch pump provides system pressure for the cushion-hitch system and pilot pressure for the implement system.
Illustration 2 | g03717074 |
The cushion-hitch accumulators are mounted to the right-hand side of the hitch frame.
Illustration 3 | g03717090 |
The cushion-hitch leveling valve is on the right-hand side of the tractor below the cushion-hitch accumulators.
Cushion-Hitch Ride Dampening Valve
Illustration 4 | g03717089 |
The cushion-hitch dampening valve is on the right-hand side of the tractor below the cushion-hitch accumulators.
Illustration 5 | g06216195 |
The load cylinder is mounted to the hitch frame. The cushion-hitch position sensor is located in the load cylinder.
Illustration 6 | g06216198 |
The pilot control manifold is on the left side of the hitch assembly. The pilot control manifold contains the pressure reducing valve for the pilot system and the cushion-hitch leveling solenoid.
Cushion-Hitch/Pilot Oil Filter
Illustration 7 | g06216200 |
The cushion-hitch/pilot oil filter is located in the center rear of the tractor.
Illustration 8 | g06216212 |
The implement pump is mounted to the transfer case at the rear of the tractor. The implement pump provides system pressure for implements added to the tractor.
Implement Control Valve, Pilot Control Solenoid, and Pilot Oil Accumulator
Illustration 9 | g06216215 |
The implement control valve, pilot control solenoid, and pilot oil accumulator are on the right-hand side of the rear of the tractor.
Illustration 10 | g06216220 |
Hydraulic oil tank is located on the right-hand side of the machine. The hydraulic oil temperature sensor is mounted in the hydraulic oil tank. The hydraulic return filter is located inside the hydraulic oil tank.
The implements and the cushion hitch systems are supplied by the hydraulic oil tank.
Illustration 11 | g03419081 |
The Implement Joystick is located on the right side of the operator station inside the cab.
The Joystick is used to operate implements attached to the tractor.
Illustration 12 | g03419088 |
The cushion-hitch switch is located on the joystick control on the right side of the operator seat. The cushion-hitch switch is used by the operator to activate or deactivate the cushion-hitch system.
Illustration 13 | g03717468 |
The implement lockout switch is located on the console to the right side of the operator seat. The implement lockout switch prevents movement of the implement system.
Implement Electronic Control Module
Illustration 14 | g03419729 |
The implement electronic control module is located behind the operator's seat, in the rear access panel. The electronic control module controls all electronic signals from the implement system, including solenoids, sensors, and switches.
Illustration 15 | g03717471 |
The cushion-hitch electronic control module is mounted to the cushion-hitch accumulator bracket on the right side of the tractor.