Piston and Rings
Show/hide table
| |
| Illustration 1 | g06226990 |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| Thoroughly lubricate the entire piston in zone with clean engine oil prior to assembly into the cylinder block. | |||
| 1 | 1 | 349-2568 Piston Ring | Install the top piston ring with the side marked "Up-1" toward the top of the piston.
Clearance between the ends of the top piston ring is Thickness of new top piston ring is |
| 2 | 1 | 344-5153 Piston Ring | Install the intermediate piston ring with the side marked "Up-2" toward the top of the piston.
Clearance between the ends of the intermediate piston ring is Thickness of new intermediate piston ring is |
| 3 | 1 | 246-5659 Piston Ring | The ends of the oil control piston ring should be at a distance of 180 degrees from the ring end gap when the oil control piston ring is assembled.
Clearance between the groove and the new oil control piston ring is Thickness of new oil control piston ring is Width of groove in new piston body assembly for oil control piston ring is |
| 4 | 1 | 524-5565 Piston Pin | Thoroughly lubricate the piston pin with clean engine oil before the piston pin is inserted into the piston body assembly and the rod assembly.
Outside diameter of the new piston pin is Inside diameter of the new piston pin is Length of the new piston pin is Bore in the new piston body assembly for the piston pin is |
| 5 | 2 | 250-2940 Pin Retainer | Install the pin retainer with the gap at the bottom of the piston as shown in Illustration 1. |
| 6 | 1 | 150-1156 Special Bolt | Torque to |
| - | - | - | After the piston rings have been installed, rotate the piston rings so that the end gaps are 120 degrees from each other. |
Caterpillar Information System:
C27 Tier 4 Final Engines For Motorgraders Muffler
992K Wheel Loader Systems Pressure Sensor - Parking Brake, Hydraulic Fan, Steering Pump, Brake Accumulator
New Implement Software is Now Used on Certain Wheel Tractor-Scrappers Equipped With Cat® Grade Control {7620} New Implement Software is Now Used on Certain Wheel Tractor-Scrappers Equipped With Cat® Grade Control {7620}
Check the Drive Shaft on AD55B and AD60 Underground Articulated Trucks {3253} Check the Drive Shaft on AD55B and AD60 Underground Articulated Trucks {3253}
AD22 Underground Articulated Truck Braking System Machine Preparation for Troubleshooting
AD22 Underground Articulated Truck Braking System Brake System Troubleshooting
AD22 Underground Articulated Truck Braking System Gear Pump (Brake Oil Cooler)
AD22 Underground Articulated Truck Braking System Hydraulic Accumulator
AD22 Underground Articulated Truck Braking System Brake Control Valve (Service)
AD22 Underground Articulated Truck Braking System Retarder Control Valve
AD22 Underground Articulated Truck Braking System Pressure Sensor (Brake Accumulator Oil)
AD22 Underground Articulated Truck Braking System Switch (Retarder Lever)
3512E Engines for Well Stimulation Pumps Temperature Sensor - Aftercooler ( Air ), Implement Tank, Pilot Oil
631K OEM Wheel Tractor Machine Systems Location of Components (Hydraulic System)
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Sensors (Seat) - Test and Adjust - If Equipped
Improved Torque Converter Impeller Now Used on AD45B Underground Articulated Trucks {3101} Improved Torque Converter Impeller Now Used on AD45B Underground Articulated Trucks {3101}
992K Wheel Loader Systems Tilt Cylinder
992K Wheel Loader Systems Solenoid Valve - Parking Brake
Payload Control System (PCS) Software May Not Support Certain 986H Wheel Loaders {1439, 7490, 7494, 7610, 7620} Payload Control System (PCS) Software May Not Support Certain 986H Wheel Loaders {1439, 7490, 7494, 7610, 7620}
992K Wheel Loader Systems Solenoid Valve
992K Wheel Loader Systems Solenoid Valve - Implement Pilot
320, 323 Excavator Engine Supplement Oil Pan - Remove and Install
973K Track-Type Loader Power Train Control Manifold - Remove and Install - Return
631K OEM Wheel Tractor Machine Systems Electronic Control (Hydraulic System)