An Improved Track Adjuster Yoke Allows for a Higher Rated Fuse Plate That Will Provide a More Reliable and Durable Recoil System is Now Used On Certain D3K2, D4K2, and D5K2 Track-Type Tractors {4157} Caterpillar


An Improved Track Adjuster Yoke Allows for a Higher Rated Fuse Plate That Will Provide a More Reliable and Durable Recoil System is Now Used On Certain D3K2, D4K2, and D5K2 Track-Type Tractors {4157}

Usage:

D3K2 XL FT3
Track-Type Tractor
D3K2 (S/N: KF21-2236; KL21-2617; FT31-2119; LT31-2115; JPJ1-2204)
D4K2 (S/N: KM21-2292; KR21-2344; MT31-2124; RT31-2130)
D5K2 (S/N: KW21-2505; KY21-2800; WT31-2180; YT31-2163; RRE1-2215)

Description Of Change: A new manufacturing process for the track adjuster yoke is now used that allows for a higher rated fuse plate that will provide a more reliable and durable recoil system.

Adaptable To: The following parts are adaptable to the machines within the listed serial numbers, and are effective with all machines after the listed serial numbers.

Table 1
Required Parts (for one side of machine) 
Sales Model  QTY  New Part Number  Part Name  Former Part Number 
D3K2 D4K2  469-6321  Yoke  353-5793 
D5K2  469-6322  Yoke  352-8991 
D3K2 D4K2 D5K2  496-9798  Plate  455-9745 

Caterpillar Information System:

C27 and C32 Engine for MD6250 and MD6310 Drill Engine Misfires, Runs Rough or Is Unstable
Improved Angle Cylinder Pin Designs Are Now Available For Certain D6T Track-Type Tractors {6052, 6060, 6701} Improved Angle Cylinder Pin Designs Are Now Available For Certain D6T Track-Type Tractors {6052, 6060, 6701}
Installation Procedure For Updating Angle Cylinder Pins on Certain D6T Track-Type Tractors {6052, 6060, 6701} Installation Procedure For Updating Angle Cylinder Pins on Certain D6T Track-Type Tractors {6052, 6060, 6701}
C32 Tier 4 Final Marine Commercial Engines Crankcase Pressure Is High
A New Tube Assembly for the Push-Pull Arrangement is Now Used on Certain 621K and 627K Wheel Tractor-Scrapers {5057, 5308, 5479, 7103, 7253} A New Tube Assembly for the Push-Pull Arrangement is Now Used on Certain 621K and 627K Wheel Tractor-Scrapers {5057, 5308, 5479, 7103, 7253}
Improved Ripper Cylinder Rod Assemblies are Now Used On Certain D10T Track-Type Tractors {5352, 5356} Improved Ripper Cylinder Rod Assemblies are Now Used On Certain D10T Track-Type Tractors {5352, 5356}
MD6200 Rotary Drill Condenser (Refrigerant) - Clean
Check Power Train Diagnostic Codes on AD60 Underground Articulated Trucks {4800, 7610} Check Power Train Diagnostic Codes on AD60 Underground Articulated Trucks {4800, 7610}
D6K2 Track-Type Tractor Machine Systems Gear Pump (Fan Drive) - Remove and Install
MD6310 Rotary Drill Cooling System Coolant (ELC) - Change
MD6310 Rotary Drill Cooling System Coolant Extender (ELC) - Add
MD6310 Rotary Drill Cooling System Coolant Level - Check - Engine
D6K Track-Type Tractor Fuses and Circuit Breakers - Replace/Reset
D6K2 Track-Type Tractor Machine Systems Accumulator (Hydraulic) - Remove and Install
C7.1 Engines Welding Precaution
D6K2 Track-Type Tractor Machine Systems Ripper Lift Cylinder - Remove and Install
A Procedure to Rework the Air Conditioner Group Filter Cover Is Used for Certain K-Series and M-Series Medium Wheel Loaders {7320, 7342} A Procedure to Rework the Air Conditioner Group Filter Cover Is Used for Certain K-Series and M-Series Medium Wheel Loaders {7320, 7342}
Recommendations for Calculating Service Brake Shimming During Axle Repairs on Certain Telehandlers {5486} Recommendations for Calculating Service Brake Shimming During Axle Repairs on Certain Telehandlers {5486}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499} Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Scuffing/Scoring May Occur in Bevel Gear Set on Certain 992K and 854K Wheel Dozers {3254, 3256, 3257, 3258} Scuffing/Scoring May Occur in Bevel Gear Set on Certain 992K and 854K Wheel Dozers {3254, 3256, 3257, 3258}
An Improved Sealing Process for Air Conditioning Cover Bolts and Bosses on Certain Series K, Series L, Series M, and Series GC Medium Wheel Loaders {7320} An Improved Sealing Process for Air Conditioning Cover Bolts and Bosses on Certain Series K, Series L, Series M, and Series GC Medium Wheel Loaders {7320}
994K Wheel Loader Systems Air Lines
320GC, 320 and 323 Excavators Machine Systems Stick - Remove and Install
D6K Track-Type Tractor Fuel System Primary and Secondary Filters - Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.