953K Track-Type Loader Engine Supplement Caterpillar


Engine Oil Filter and Base - Remove and Install

Usage:

953K LJT

拆卸步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
185-3630  带式扳手组件 


    图 1g06119340

  1. 打开门组件 (1)。

  2. 将蓄电池断路开关转到断开位置。


    图 2g06132138

  3. 使用工具 (A),拆下发动机机油滤清器 (4)。

  4. 拆下螺栓 (2) 和发动机机油滤清器底座 (3)。

安装步骤

  1. 按与拆卸相反的顺序安装发动机机油滤清器底座 (3) 和发动机机油滤清器 (4)。

    1. 拧紧螺栓 (2) 至扭矩为 22 N·m (195 lb in)

Caterpillar Information System:

D6T Track Type Tractor Power Train Bevel and Transfer Gears - Assemble
D8R and D8T Track-Type Tractors Cooler Cores and A/C Condenser - Clean
953K Track-Type Loader Engine Supplement Fuel Priming Pump - Remove and Install - Electric Fuel Lift Pump (EFLP)
980L Tier 3 Wheel Loader Engine Supplement Electric Starting Motor - Remove and Install
992K Wheel Loader Piston Pump (Implement)
525D, 535D, 545D, 555D Wheel Skidder Daily Inspection
990K Wheel Loader Systems Steering Control Group
992K Wheel Loader Systems Liquid Level Sensor (Implement, Hydraulic Fan Tank) (Steering, Brake Tank)
854K Wheel Dozer Systems Lift Cylinder
980L Tier 3 Wheel Loader Machine System Loader Frame to Rear Frame - Connect
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager System Schematic
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Calibration Using Electronic Service Tool
Retrofitting Cab Tilt Pins and New Non-metallic Bushings on Certain D7E Track-Type Tractors {7266} Retrofitting Cab Tilt Pins and New Non-metallic Bushings on Certain D7E Track-Type Tractors {7266}
New Non-metallic Bushings for the Tilt Cab are Now Used on Certain D7E Track-Type Tractors {7266} New Non-metallic Bushings for the Tilt Cab are Now Used on Certain D7E Track-Type Tractors {7266}
Installation Procedure for the Material Handling Slip-On Buckets on Certain Logging Forks {0679, 6001, 6101, 6103, 6104, 6113, 6114, 6123, 6405} Installation Procedure for the Material Handling Slip-On Buckets on Certain Logging Forks {0679, 6001, 6101, 6103, 6104, 6113, 6114, 6123, 6405}
525D, 535D, 545D, 555D Wheel Skidder Monitoring System - Later Models
MD6310 Rotary Drill Mast Traveling Sheaves - Lubricate
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Neutralizer Switch - Integrated Braking System (IBS)
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Combination Valve (Brake Accumulator Charge, Fan Supply, Steering Pilot, Implement Pilot) - Disassemble
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Combination Valve (Brake Accumulator Charge, Fan Supply, Steering Pilot, Implement Pilot) - Assemble
992K Wheel Loader Ride Control System
MD6310 Rotary Drill Pump Drive Oil - Change
990K Wheel Loader Fire Extinguisher Location
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Differential (Limited Slip)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.