Steering Control Group
Show/hide table
| |
| Illustration 1 | g06131980 |
Show/hide table
| Specification for 503-1433 Steering Control and Mounting Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 138-8454 Screw | Torque to |
| 2 | 6 | Screw | Torque to |
| 3 | 1 | 9X-1046 | Before assembly, apply blue Loctite 243 to the threads. |
| 4 | 1 | 9X-2045 Screw | Torque to |
Show/hide table
| |
| Illustration 2 | g06131954 |
|
239-3666 Steering Control Gp | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 5 | 2 | 149-7370 Abrasion Sleeve | Torque to |
| 6 | 2 | 149-7370 Abrasion Sleeve | Torque to |
Show/hide table
| |
| Illustration 3 | g06132024 |
|
432-6163 STIC Lockout Control Gp | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 7 | 2 | 5C-7261 Nut | Torque to |
| 8 | 1 | 8T-4133 Nut | Before assembly, apply red Loctite 271 to the threads.
Torque to |
| 9 | 1 | 8T-4133 Nut | Before assembly, apply Loctite 271 to the threads.
Torque to |
| 10 | 1 | 8T-4133 Nut | Torque to |
| 11 | 1 | 8C-3442 Coil Spring | Length under test force is Test force is Free length after test is |
Caterpillar Information System:
992K Wheel Loader Systems Liquid Level Sensor (Implement, Hydraulic Fan Tank) (Steering, Brake Tank)
854K Wheel Dozer Systems Lift Cylinder
980L Tier 3 Wheel Loader Machine System Loader Frame to Rear Frame - Connect
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager System Schematic
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Calibration Using Electronic Service Tool
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Calibration Using Display Module
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager General Information (Calibration)
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Troubleshooting
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager VIMSpc Payload Reports
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager VIMSpc Software
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Service Tool Software
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Weigh Range Adjusting
525D, 535D, 545D, 555D Wheel Skidder Daily Inspection
992K Wheel Loader Piston Pump (Implement)
980L Tier 3 Wheel Loader Engine Supplement Electric Starting Motor - Remove and Install
953K Track-Type Loader Engine Supplement Fuel Priming Pump - Remove and Install - Electric Fuel Lift Pump (EFLP)
D8R and D8T Track-Type Tractors Cooler Cores and A/C Condenser - Clean
D6T Track Type Tractor Power Train Bevel and Transfer Gears - Assemble
953K Track-Type Loader Engine Supplement Engine Oil Filter and Base - Remove and Install
Retrofitting Cab Tilt Pins and New Non-metallic Bushings on Certain D7E Track-Type Tractors {7266} Retrofitting Cab Tilt Pins and New Non-metallic Bushings on Certain D7E Track-Type Tractors {7266}
New Non-metallic Bushings for the Tilt Cab are Now Used on Certain D7E Track-Type Tractors {7266} New Non-metallic Bushings for the Tilt Cab are Now Used on Certain D7E Track-Type Tractors {7266}
Installation Procedure for the Material Handling Slip-On Buckets on Certain Logging Forks {0679, 6001, 6101, 6103, 6104, 6113, 6114, 6123, 6405} Installation Procedure for the Material Handling Slip-On Buckets on Certain Logging Forks {0679, 6001, 6101, 6103, 6104, 6113, 6114, 6123, 6405}
525D, 535D, 545D, 555D Wheel Skidder Monitoring System - Later Models
MD6310 Rotary Drill Mast Traveling Sheaves - Lubricate