New Non-metallic Bushings for the Tilt Cab are Now Used on Certain D7E Track-Type Tractors {7266}
- Track-Type Tractor
- D7E (S/N: HKA1-482; TJA1-1205; MDB1-UP; SCG1-UP; SSH1-390; TAN1-1347)
Reference: Special Instruction, M0077086, "Retrofitting Cab Tilt Pins and New Non-metallic Bushings on Certain D7E Track-Type Tractors"
Description Of Change: New non -metallic bushings for the tilt cab are now used on certain D7E Track-Type Tractors. The new non-metallic bushings will help to improve the service life of the pins for the tilt cab.
Adaptable To: The new non-metallic bushings are adaptable to all the above listed machines by performing the steps listed in the Special Instruction above.
Caterpillar Information System:
Retrofitting Cab Tilt Pins and New Non-metallic Bushings on Certain D7E Track-Type Tractors {7266} Retrofitting Cab Tilt Pins and New Non-metallic Bushings on Certain D7E Track-Type Tractors {7266}
953K Track-Type Loader Engine Supplement Engine Oil Filter and Base - Remove and Install
D6T Track Type Tractor Power Train Bevel and Transfer Gears - Assemble
D8R and D8T Track-Type Tractors Cooler Cores and A/C Condenser - Clean
953K Track-Type Loader Engine Supplement Fuel Priming Pump - Remove and Install - Electric Fuel Lift Pump (EFLP)
980L Tier 3 Wheel Loader Engine Supplement Electric Starting Motor - Remove and Install
992K Wheel Loader Piston Pump (Implement)
525D, 535D, 545D, 555D Wheel Skidder Daily Inspection
990K Wheel Loader Systems Steering Control Group
992K Wheel Loader Systems Liquid Level Sensor (Implement, Hydraulic Fan Tank) (Steering, Brake Tank)
854K Wheel Dozer Systems Lift Cylinder
980L Tier 3 Wheel Loader Machine System Loader Frame to Rear Frame - Connect
Installation Procedure for the Material Handling Slip-On Buckets on Certain Logging Forks {0679, 6001, 6101, 6103, 6104, 6113, 6114, 6123, 6405} Installation Procedure for the Material Handling Slip-On Buckets on Certain Logging Forks {0679, 6001, 6101, 6103, 6104, 6113, 6114, 6123, 6405}
525D, 535D, 545D, 555D Wheel Skidder Monitoring System - Later Models
MD6310 Rotary Drill Mast Traveling Sheaves - Lubricate
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Neutralizer Switch - Integrated Braking System (IBS)
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Combination Valve (Brake Accumulator Charge, Fan Supply, Steering Pilot, Implement Pilot) - Disassemble
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Combination Valve (Brake Accumulator Charge, Fan Supply, Steering Pilot, Implement Pilot) - Assemble
992K Wheel Loader Ride Control System
MD6310 Rotary Drill Pump Drive Oil - Change
990K Wheel Loader Fire Extinguisher Location
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Differential (Limited Slip)
MD6310 Rotary Drill Pump Drive Oil Level - Check
Procedure to Install the 476-9627 Secondary Steering Kit on Certain 988K Wheel Loader {4304, 4324, 4334} Procedure to Install the 476-9627 Secondary Steering Kit on Certain 988K Wheel Loader {4304, 4324, 4334}