Location of Components (Fan Hydraulic System)
Show/hide table
| |
| Illustration 1 | g06139579 |
The hydraulic tank is located behind the operator cab under the right-hand access panel.
Show/hide table
| |
| Illustration 2 | g03550539 |
Fan /Brake / Charge Pump is a fixed displacement gear pump located behind the machine cab.
Show/hide table
| |
| Illustration 3 | g03550540 |
The brake/charge priority valve is found under the cab on the right-hand side frame.
Show/hide table
| |
| Illustration 4 | g03550556 |
The fan motor is at the back of the machine between the radiators and the engine.
Show/hide table
| |
| Illustration 5 | g06090145 |
The hydraulic oil filter is located under the right-hand side engine cover.
Show/hide table
| |
| Illustration 6 | g03550616 |
The hydrostatic pump is located under the cab of the machine.
Caterpillar Information System:
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Machine System General Information (Fan Hydraulic System)
TRS10, TRS14, TRS18, and TRS23 Tilt-Rotator Safety Messages
TRS10, TRS14, TRS18, and TRS23 Tilt-Rotator Operation
Track Shoes Are Service-Replaced On Some D6 Track-Type Tractors {4170} Track Shoes Are Service-Replaced On Some D6 Track-Type Tractors {4170}
910M, 914M, 918M, 910K, and 914K Compact Wheel Loaders, Engine Supplement Diesel Exhaust Fluid Tank - Remove and Install
TRS10, TRS14, TRS18, and TRS23 Tilt-Rotator Declaration of Conformity
An Improved Dust Ejector Hose is Now Available for Certain 988K Large Wheel Loaders, 834K Large Wheel Dozers, and 836K Compactors {1068, 7554} An Improved Dust Ejector Hose is Now Available for Certain 988K Large Wheel Loaders, 834K Large Wheel Dozers, and 836K Compactors {1068, 7554}
854K Wheel Dozer Seat Belt Reminder System
D5R and D6N Track-Type Tractor Machine Systems Hydraulic Tank - Assemble
Procedure to Rework the Governor and Brake Pedal for Certain D3K2, D4K2, and D5K2 Small Track Type Tractors {4122} Procedure to Rework the Governor and Brake Pedal for Certain D3K2, D4K2, and D5K2 Small Track Type Tractors {4122}
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Machine System Calibrations, Diagnostic Tests (Cat ET)
Procedure to Install Grease Line in the Front Lines Group on Certain 980M and 982M Wheel Loaders {7510, 7540} Procedure to Install Grease Line in the Front Lines Group on Certain 980M and 982M Wheel Loaders {7510, 7540}
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Machine System Gear Motor (Hydraulic Fan)
TRS10, TRS14, TRS18, and TRS23 Tilt-Rotator Specifications
C175-16 and C175-20 Locomotive Engines Accumulator (Fuel Injection) - Remove and Install
980M and 982M Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Electronic Control (Hydraulic System)
D6 Track-Type Tractor Electrohydraulic Systems Parameter - Test
TRS10, TRS14, TRS18, and TRS23 Tilt-Rotator Plate Locations and Film Locations
D5R and D6N Track-Type Tractor Engine Supplement Alternator - Remove and Install
Intermittent Steering Codes Being Logged in Secondary Steering Request Signal Lines on Certain M Series Medium Wheel Loaders {4348, 5701, 7490, 7610, 7620} Intermittent Steering Codes Being Logged in Secondary Steering Request Signal Lines on Certain M Series Medium Wheel Loaders {4348, 5701, 7490, 7610, 7620}
D5R and D6N Track-Type Tractor Engine Supplement Muffler - Remove and Install
C175-16 Locomotive Engine Exhaust Temperature Is Low
973K Track Type Loader Safety Messages
973K Track Type Loader Additional Messages