TRS10, TRS14, TRS18, and TRS23 Tilt-Rotator Caterpillar


Safety Messages

Usage:

TRS14 E23
A munkaeszközön több, különböző biztonsági figyelmeztető jel található. Ez a fejezet a biztonsági figyelmeztető jelek pontos helyét és jelentésüket ismerteti. Ismerje meg az összes biztonsági figyelmeztető jelet.

Gondoskodjon róla, hogy valamennyi biztonsági figyelmeztető üzenet mindig jól olvasható legyen. Ha egy biztonsági figyelmeztető üzeneten a szöveget nem lehet elolvasni, tisztítsa meg, vagy cserélje ki az üzenetet. Ha egy biztonsági figyelmeztető jelen az ábra nem jól látható, cserélje ki a jelet. A figyelmeztető üzeneteket ronggyal, vízzel és szappannal mossa le. A biztonsági figyelmeztető üzenetek megtisztításához ne használjon oldószert, benzint, vagy hasonló erős vegyi anyagot. Az oldószerek, a benzin és az erős vegyi anyagok feloldhatják a biztonsági figyelmeztető üzenet ragasztóanyagát. Ha a ragasztóanyag feloldódik, a biztonsági üzenet leeshet.

Ha egy biztonsági figyelmeztető üzenet megsérült vagy leesett, rakjon fel helyette újat. Ha olyan elemet cserélt ki, amelyen biztonsági figyelmeztető üzenet volt, gondoskodjon róla, hogy ugyanez az üzenet az új elemre is rákerüljön. Új biztonsági figyelmeztető üzenetek bármelyik Cat márkakereskedőnél beszerezhetők.



Illusztráció 1g06405851
Jellemző billentő rotátor

Tilos elindítani! (1)

Ez a biztonsági üzenet a billentő rotátor mindegyik oldalán megtalálható.



Illusztráció 2g01254987

------ FIGYELMEZTETÉS! ------

Csak akkor üzemeltesse vagy szerelje ezt a berendezést, ha elolvasta és megértette a Használati és karbantartási kézikönyvekben szereplő utasításokat és figyelmeztetéseket. Ha nem tartja be az utasításokat vagy nem veszi figyelembe a figyelmeztetéseket, az sérülést vagy halált okozhat. Csere kézikönyvekért forduljon Cat márkakereskedőjéhez. A megfelelő óvatosság az Ön felelőssége.


Caterpillar Information System:

TRS10, TRS14, TRS18, and TRS23 Tilt-Rotator Operation
Track Shoes Are Service-Replaced On Some D6 Track-Type Tractors {4170} Track Shoes Are Service-Replaced On Some D6 Track-Type Tractors {4170}
910M, 914M, 918M, 910K, and 914K Compact Wheel Loaders, Engine Supplement Diesel Exhaust Fluid Tank - Remove and Install
TRS10, TRS14, TRS18, and TRS23 Tilt-Rotator Declaration of Conformity
An Improved Dust Ejector Hose is Now Available for Certain 988K Large Wheel Loaders, 834K Large Wheel Dozers, and 836K Compactors {1068, 7554} An Improved Dust Ejector Hose is Now Available for Certain 988K Large Wheel Loaders, 834K Large Wheel Dozers, and 836K Compactors {1068, 7554}
854K Wheel Dozer Seat Belt Reminder System
D5R and D6N Track-Type Tractor Machine Systems Hydraulic Tank - Assemble
Procedure to Rework the Governor and Brake Pedal for Certain D3K2, D4K2, and D5K2 Small Track Type Tractors {4122} Procedure to Rework the Governor and Brake Pedal for Certain D3K2, D4K2, and D5K2 Small Track Type Tractors {4122}
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Machine System Calibrations, Diagnostic Tests (Cat ET)
Procedure to Install Grease Line in the Front Lines Group on Certain 980M and 982M Wheel Loaders {7510, 7540} Procedure to Install Grease Line in the Front Lines Group on Certain 980M and 982M Wheel Loaders {7510, 7540}
973K Track Type Loader Maintenance Interval Schedule
Improved Grease Line in the Front Lines Group Is Now Used on Certain 980M and 982M Wheel Loaders {7510, 7540} Improved Grease Line in the Front Lines Group Is Now Used on Certain 980M and 982M Wheel Loaders {7510, 7540}
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Machine System General Information (Fan Hydraulic System)
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Machine System Location of Components (Fan Hydraulic System)
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Machine System Gear Motor (Hydraulic Fan)
TRS10, TRS14, TRS18, and TRS23 Tilt-Rotator Specifications
C175-16 and C175-20 Locomotive Engines Accumulator (Fuel Injection) - Remove and Install
980M and 982M Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Electronic Control (Hydraulic System)
D6 Track-Type Tractor Electrohydraulic Systems Parameter - Test
TRS10, TRS14, TRS18, and TRS23 Tilt-Rotator Plate Locations and Film Locations
D5R and D6N Track-Type Tractor Engine Supplement Alternator - Remove and Install
Intermittent Steering Codes Being Logged in Secondary Steering Request Signal Lines on Certain M Series Medium Wheel Loaders {4348, 5701, 7490, 7610, 7620} Intermittent Steering Codes Being Logged in Secondary Steering Request Signal Lines on Certain M Series Medium Wheel Loaders {4348, 5701, 7490, 7610, 7620}
D5R and D6N Track-Type Tractor Engine Supplement Muffler - Remove and Install
C175-16 Locomotive Engine Exhaust Temperature Is Low
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.