Pivot Shaft Oil Level - Check
Show/hide table
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
- Remove the oil plug on one side of the machine.
- Check the pivot shaft oil level. The oil level should be at the bottom of the threaded hole.
- If necessary, add oil to bring the oil level up to the bottom of the threaded hole.
- Repeat the procedure on the other side of the machine.
Show/hide table
Illustration 1 | g06043074 |
Caterpillar Information System:
PL61 Pipelayer Hydraulic System Oil Filter (Winch) - Replace - If Equipped
PL61 Pipelayer Hydraulic System Oil Filter - Replace
PL61 Pipelayer Hydraulic System Oil - Change
631K Original Equipment Manufacturer (OEM) Wheel Tractor Hitch - Inspect
PL61 Pipelayer Fuel System - Fill
Procedure to Install an Updated Harness Assembly for the Cushion Hitch on Certain 621K, 623K, and 627K Wheel Tractor Scrapers {1408} Procedure to Install an Updated Harness Assembly for the Cushion Hitch on Certain 621K, 623K, and 627K Wheel Tractor Scrapers {1408}
631K Original Equipment Manufacturer (OEM) Wheel Tractor Brake Pads - Check
PL61 Pipelayer Front Idler Position - Check/Adjust
PL61 Pipelayer Ether Starting Aid Cylinder - Replace
PL61 Pipelayer Engine Oil and Filter - Change
PL61 Pipelayer Engine Oil Sample - Obtain
PL61 Pipelayer Engine Oil Level - Check
PL61 Pipelayer Radiator Pressure Cap - Clean/Replace
PL61 Pipelayer Track - Check/Adjust
950M and 962M Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems General Information (Electronic Control System)
PL61 Pipelayer Track Roller Frame - Inspect
New Method for Hystat Calibration without Raising the Machine on All 924K, 926M, 930K, 930M, 938K, and 938M Wheel Loaders {0374, 4350, 4350, 7490, 7610, 7620} New Method for Hystat Calibration without Raising the Machine on All 924K, 926M, 930K, 930M, 938K, and 938M Wheel Loaders {0374, 4350, 4350, 7490, 7610, 7620}
PL61 Pipelayer Window Washer Reservoir - Fill
PL61 Pipelayer Window Wipers - Inspect/Replace
PL61 Pipelayer Fuel System Filter (In-Line) - Replace
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Pump Swash Plate - Health Check
A New Electronic Control Module (ECM) Cover Is Now Used For Certain C9.3 Machine Engines {1408} A New Electronic Control Module (ECM) Cover Is Now Used For Certain C9.3 Machine Engines {1408}
631K OEM Wheel Tractor Systems Hydraulic Accumulator
631K OEM Wheel Tractor Systems Hydraulic Accumulator