New Software is Now Available {1901, 1902, 7620}
- Engine:
- C7 (S/N: JRA1-UP; JTF1-UP)
- Industrial Engine:
- C9 (S/N: JSC1-UP; MBD1-UP)
New software is now available for improved cold temperature starting for the above listed engines. Refer to Table 1 for information on the software.
Show/hide table
| New Software | |||
| Sales Model | Horsepower Rating | Part Number | Part Name |
| C7 | 197 hp | 291-2152 | Engine Ratings Electronic Software Gp |
| C9 | 275/300 hp | 278-6028 | Engine Ratings Electronic Software Gp |
| C9 | 325 hp | 278-6029 | Engine Ratings Electronic Software Gp |
| C9 | 350 hp | 278-6030 | Engine Ratings Electronic Software Gp |
| C9 | 375 hp | 278-2399 | Turbocharger Gp |
Caterpillar Information System:
C15 and C18 Engines Belts - Inspect/Adjust/Replace
Air/Fuel Ratio Control Nitrogen Oxide Sensor Calibration
C3.3 Industrial Engine Overhaul Considerations
C3.3 Industrial Engine Plate Locations and Film Locations
C3.3 Industrial Engine Product Lifting
C3.3 Industrial Engine Product Storage
C3.3 Industrial Engine Reference Numbers
C3.3 Industrial Engine Refill Capacities and Recommendations
C3.3 Industrial Engine Severe Service Application - Check
C3.3 Industrial Engine Stopping the Engine
C3.3 Industrial Engine Turbocharger - Inspect - If Equipped
C3.3 Industrial Engine Walk-Around Inspection
C3.3 Industrial Engine Fuel and the Effect from Cold Weather
G3500B Engines Air/Fuel Ratio Control - Adjust - NO<SUB>X</SUB> Feedback
3512C Industrial Engine Camshaft - Remove
Combining Machined Connecting Rods and Fractured Connecting Rods in Some On-highway Engines{1225} Combining Machined Connecting Rods and Fractured Connecting Rods in Some On-highway Engines{1225}
Air/Fuel Ratio Control Diagnostic Display
C15 and C18 Generator Set Engines Fan Guard - Remove and Install
C3.3 Industrial Engine Fuel System Secondary Filter - Replace
C3.3 Industrial Engine Fuel System Primary Filter (Water Separator) Element - Replace
C3.3 Industrial Engine Fuel System Primary Filter/Water Separator - Drain
C15 and C18 Generator Set Engines Fan - Remove and Install
2007/06/25 Do Not Allow the Advisor Display to Overheat {7490}
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Reference Material