New Software is Now Used for all Cat ® Object Detection and Vision Applications On Certain Cat ® Products {7348, 7605}
- Landfill Compactor:
- 826K (S/N: SET1-UP; 2321-UP)
- Soil Compactor:
- 825K (S/N: SEE1-UP; 2331-UP)
- Wheel Dozer:
- 824K (S/N: RWB1-UP; 2341-UP)
- Wheel Loader:
- 988K (S/N: LWX1-UP; TWX1-UP)
- 836K (S/N: TWZ1-UP)
- 834K (S/N: LWY1-UP; TWY1-UP)
- 844K (S/N: MBE1-UP; KLS1-UP)
- 990K (S/N: DJK1-UP)
Cat ® Detect Object Detection Software Release 4.2 for Touch Screen Displays
Part Number for Vision:
- 482-9863 Monitor Software Gp
Part Number for Radar:
- 482-9862 Monitor Software Gp
Requirements:
Display HW Requirement: 373-2281 Display Module Gp or 441-5131 Electronic Control Gp
Display OS Requirement: D3C4 1.3.17
Build Date: May 2015
Caterpillar Electronic Technician Requirement: 2015A or newer
Note: Refer to Special Instructions, REHS7353, "Procedure for Installing Object Detection Software on Monitor Display Group" for flashing instructions.
Carry Over:
Support for the following models is continued:
- 988K (LWX, TWX)
- 834K (LWY, TWY)
- 836K (LWZ, TWZ)
- 990K (A9K, DJK)
- 844K (KLS, MBE)
- 824K (234, RWB)
- 825K (233, SEE)
- 826K (232, SET)
Support for the following languages is continued:
- English
- Spanish
- Portuguese
- Indonesian
- French
- German
- Norwegian
- Swedish
- Finnish
- Dutch
- Danish
- Italian
- Turkish
- Russian
- Japanese
- Icelandic
- Chinese
- Hindi
- Mongolian
New Features:
- Support for GEN III Radar added
- Add HW support for G407 display
- All models listed now support front and rear cameras. Front camera support through channel "CAM 1" and rear camera support through "CAM 3". Refer to REHS9778 for front camera installation.
- Retain standby camera and neutral gear camera view settings through key cycle
Issues Resolved:
- Camera Image improvements in direct sunlight
- Camera no longer displays pink when the camera is disconnected .
- No fault due to response time with total operating hours on 994K
- No Longer will trigger blockage when machine is put to forward gear
- ET Status screen no longer shows 0.00/Caution when object distance is 20 m.
- Certain logged diagnostics are no longer deleted over key cycle.
- Service Hour Meter value is now updated in Diagnostic Detail screen.
- Menu selection is now memorized when returning to higher level of menu.
- No longer shows two camera reference line when pressing "Show/Hide" button twice.
- Camera view toggling improvements
- No longer displays truncated strings in French language on Diagnostic screen.
- Russian translation on Language Menu screen improved.
Caterpillar Information System:
2015/05/04 Improved Options For Configuring The Engine Cooling Fan Are Now Used For Certain D11T Track-Type Tractors {1386, 1901}
953K, 963K, and 973 Track-Type Loader Monitoring System Display Menu
D6R2 Track-Type Tractor Power Train System Oil And Screens - Change/Clean
D6R2 Track-Type Tractor Fuel System Primary and Secondary Filters - Replace
953K, 963K, and 973 Track-Type Loader Monitoring System Menus
D6R2 Track-Type Tractor Engine Air Filter Primary and/or Secondary Element - Clean/Replace
D6R2 Track-Type Tractor Maintenance Interval Schedule
953K, 963K, and 973 Track-Type Loader Monitoring System Menu Navigation
953K, 963K, and 973 Track-Type Loader Monitoring System Diagnostic Operation
D8T Track-Type Tractor Steering Pump - Test and Adjust
953K Track-Type Loader Machine Systems Gear Pump (Fan Drive)
953K, 963K, and 973 Track-Type Loader Monitoring System Warning Operation
953K, 963K, and 973 Track-Type Loader Monitoring System Totals Menu
D6R2 Track-Type Tractor Power Train System Oil Level - Check
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7451} Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7451}
D6R2 Track-Type Tractor Fuel System Primary Filter/Water Separator - Drain
953K, 963K, and 973 Track-Type Loader Monitoring System Service Menu
D6R2 Track-Type Tractor Power Train System Oil Sample - Obtain
D6R2 Track-Type Tractor Hydraulic System Oil Filters - Replace
Repair Procedure for Lift Arm Crossmember Cracks {0679, 6107, 6119} Repair Procedure for Lift Arm Crossmember Cracks {0679, 6107, 6119}
953K Track-Type Loader Machine Systems Gear Motor (Fan Drive)
2015/05/06 New T-Bolt Clamps are Now Used on Certain D10T, D10T2, and D11T Track-Type Tractors {1071, 1380}
C2.2 Engines For Caterpillar Built Machines CAN Data Link - Test
C2.2 Engines For Caterpillar Built Machines Data Link Configuration Status - Test