Display Menu
Show/hide table
Illustration 1 | g03833125 |
Display Menu |
Show/hide table
Illustration 2 | g03795041 |
Display Menu |
The default worklights-ON brightness level is 60%. The worklights-ON brightness level can be changed using the Display > Brightness menu.
The brightness level can be changed in ten discrete steps:
- 10%
- 20%
- 30%
- 40%
- 50%
- 60%
- 70%
- 80%
- 90%
- 100%
To change the brightness level, press the UP or DOWN arrows. A brightness level of 0% is not allowed.
Brightness settings will be stored in the Display memory, according to each Operator ID.
The available languages are listed below:
- English
- Spanish
- French
- German
- Portuguese
- Italian
- Turkish
- Japanese
- Danish
- Korean
The available Units are English and Metric.
The Set Clock format will allow the operator to set the clock.
The Clock format will allow the operator to change the clock from a 12-hour to 24-hour format.
Caterpillar Information System:
D6R2 Track-Type Tractor Power Train System Oil And Screens - Change/Clean
D6R2 Track-Type Tractor Fuel System Primary and Secondary Filters - Replace
953K, 963K, and 973 Track-Type Loader Monitoring System Menus
D6R2 Track-Type Tractor Engine Air Filter Primary and/or Secondary Element - Clean/Replace
D6R2 Track-Type Tractor Maintenance Interval Schedule
953K, 963K, and 973 Track-Type Loader Monitoring System Menu Navigation
953K, 963K, and 973 Track-Type Loader Monitoring System Diagnostic Operation
D8T Track-Type Tractor Steering Pump - Test and Adjust
953K Track-Type Loader Machine Systems Gear Pump (Fan Drive)
953K, 963K, and 973 Track-Type Loader Monitoring System Warning Operation
953K, 963K, and 973 Track-Type Loader Monitoring System Data Link
953K, 963K, and 973 Track-Type Loader Monitoring System Output Components
2015/05/04 Improved Options For Configuring The Engine Cooling Fan Are Now Used For Certain D11T Track-Type Tractors {1386, 1901}
2015/05/28 New Software is Now Used for all Cat ® Object Detection and Vision Applications On Certain Cat ® Products {7348, 7605}
953K, 963K, and 973 Track-Type Loader Monitoring System Totals Menu
D6R2 Track-Type Tractor Power Train System Oil Level - Check
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7451} Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7451}
D6R2 Track-Type Tractor Fuel System Primary Filter/Water Separator - Drain
953K, 963K, and 973 Track-Type Loader Monitoring System Service Menu
D6R2 Track-Type Tractor Power Train System Oil Sample - Obtain
D6R2 Track-Type Tractor Hydraulic System Oil Filters - Replace
Repair Procedure for Lift Arm Crossmember Cracks {0679, 6107, 6119} Repair Procedure for Lift Arm Crossmember Cracks {0679, 6107, 6119}
953K Track-Type Loader Machine Systems Gear Motor (Fan Drive)
2015/05/06 New T-Bolt Clamps are Now Used on Certain D10T, D10T2, and D11T Track-Type Tractors {1071, 1380}