D7E Track-Type Tractor Systems Caterpillar


Sprocket Segment

Usage:

D7E HKA



Illustration 1g03741372

Table 1
Specification for 327-3509 Sprocket Segment Gp    
Item     Qty     Part     Specification Description    
1     25     295-7802 Bolt     Use the following procedure to tighten bolts :

1. Before assembly, lubricate the face of the hard washers, face of the nuts, and the bolt threads with SAE 30 or equivalent.
2. Tighten the bolts to
450 ± 50 N·m (332 ± 37 lb ft).
3. Again, tighten each bolt to an additional angle of 120 ± 5 degrees.    

Caterpillar Information System:

D7E Track-Type Tractor Systems Refrigerant Condenser and Mounting
D7E Track-Type Tractor Systems Pump Control Valve (Steering)
D7E Track-Type Tractor Systems Refrigerant Compressor and Mounting
D7E Track-Type Tractor Systems Pivot Bar
D7E Track-Type Tractor Systems Piston Pump (Implement)
D7E Track-Type Tractor Systems Air Conditioner Lines
D6T Track Type Tractor Machine Systems Expansion Valve (Refrigerant)
C280 Marine Engines DEF Pump Power Supply - Test
C27 and C32 Engines for Caterpillar Built Machines Sensor Signal (PWM) - Test
C27 and C32 Engines for Caterpillar Built Machines Prelubrication - Test
2014/10/29 An Improved Inspection Process Is Now Used For the Hystat Pump Shaft On Certain D6K Track-Type Tractors {5070, 5070}
D6N Track-Type Tractor Safety Messages
D7E Track-Type Tractor Systems ROPS Group
C280 Marine Engines DEF Pump Motor - Test
C27 and C32 Engines for Caterpillar Built Machines Sensor Signal (Analog, Active) - Test
C27 and C32 Engine for MD6250 and MD6310 Drill Timing - Calibrate
C27 and C32 Engines for Caterpillar Built Machines Sensor Signal (Analog, Passive) - Test
926M, 930M and 938M Wheel Loaders Machine Systems Lift Cylinder - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Alternator Problem - Charging Problem and/or Noisy Operation
C27 and C32 Engines for Caterpillar Built Machines Coolant Contains Oil
C27 and C32 Engines for Caterpillar Built Machines Coolant Contains Fuel
D7E Track-Type Tractor Power Train Track Roller Frame - Remove and Install
312F GC and 313F GC Excavators Machine Systems Boom Drift Reduction Valve
D7E Track-Type Tractor Power Train Pivot Shaft - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.