Pivot Bar
Show/hide table
Illustration 1 | g03741359 |
Typical example |
Show/hide table
Specification for 380-7451 Pivot Bar Gp and 380-7454 Pivot Bar Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 12     | 8T-0375 Bolt     | Torque to 300 ± 40 N·m (221 ± 29 lb ft).     |
2     | -     | -     | Apply Loctite C5A Copper Anti-Seize to the diameter of the shaft.     |
3     | 24     | 7X-2583 Bolt     | Torque to 1800 ± 200 N·m (1328 ± 147 lb ft).     |
4     | 2     | 5G-9842 Seal     | Before assembly, lubricate bore lightly with the 5P-3975 Rubber Lubricant.     |
Caterpillar Information System:
D7E Track-Type Tractor Systems Piston Pump (Implement)
D7E Track-Type Tractor Systems Air Conditioner Lines
D6T Track Type Tractor Machine Systems Expansion Valve (Refrigerant)
C280 Marine Engines DEF Pump Power Supply - Test
C27 and C32 Engines for Caterpillar Built Machines Sensor Signal (PWM) - Test
C27 and C32 Engines for Caterpillar Built Machines Prelubrication - Test
2014/10/29 An Improved Inspection Process Is Now Used For the Hystat Pump Shaft On Certain D6K Track-Type Tractors {5070, 5070}
D6N Track-Type Tractor Safety Messages
Caterpillar Advanced Ride Management (CARM) Seat Suspension System Component Descriptions
Caterpillar Advanced Ride Management (CARM) Seat Suspension System General Information
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900} Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
D7E Track-Type Tractor Power Train Track Carrier Roller - Remove and Install
D7E Track-Type Tractor Systems Refrigerant Compressor and Mounting
D7E Track-Type Tractor Systems Pump Control Valve (Steering)
D7E Track-Type Tractor Systems Refrigerant Condenser and Mounting
D7E Track-Type Tractor Systems Sprocket Segment
D7E Track-Type Tractor Systems ROPS Group
C280 Marine Engines DEF Pump Motor - Test
C27 and C32 Engines for Caterpillar Built Machines Sensor Signal (Analog, Active) - Test
C27 and C32 Engine for MD6250 and MD6310 Drill Timing - Calibrate
C27 and C32 Engines for Caterpillar Built Machines Sensor Signal (Analog, Passive) - Test
926M, 930M and 938M Wheel Loaders Machine Systems Lift Cylinder - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Alternator Problem - Charging Problem and/or Noisy Operation
C27 and C32 Engines for Caterpillar Built Machines Coolant Contains Oil