2007/04/23 Caterpillar


A New Fan is Used {1356, 1360}

Usage:

C32 MED
Generator Set:
C32 GEN SET (S/N: SYC1-UP)

Description of Change: The ambient temperature capability on certain Generator Sets has been derated from 50 °C (122 °F) ambient temperature capability in order to operate at the ambient temperature capability in Technical Marketing Information TMI.

Adaptable To: The new fan assembly is adaptable to the above listed generator set. The fan assembly has been changed from 7C-3219 Fan Spider As to 256-9938 Fan. The customer can derate the power in order to operate the Generator Set at 50 °C (122 °F). The customer can derate the ambient temperature in order to maintain the standard power. Refer to Table 1 for the ratings.

Table 1
Rating     Emission Certification     Standard Power     Derated Ambient Temperature with new fan     Derated Power with new fan     Ambient Temperature    
Standby     Emission    
800 kW (1073 hp)    

46 °C (115 °F)    

718 kW (963 hp)    

50 °C (122 °F)    
Prime     Emission    
728 kW (976 hp)    

47 °C (117 °F)    

653 kW (876 hp)    

50 °C (122 °F)    
Standby     Emission    
880 kW (1180 hp)    

45 °C (113 °F)    

702 kW (941 hp)    

50 °C (122 °F)    
Prime     Emission    
800 kW (1072 hp)    

43 °C (109 °F)    

602 kW (807 hp)    

50 °C (122 °F)    
Continuous     Emission    
728 kW (976 hp)    

47 °C (117 °F)    

636 kW (853 hp)    

50 °C (122 °F)    
Standby     Certified    
1000 kW (1341 hp)    

46 °C (115 °F)    

889 kW (1192 hp)    

50 °C (122 °F)    
Prime     Certified    
910 kW (1220 hp)    

46 °C (115 °F)    

772 kW (1035 hp)    

50 °C (122 °F)    
Continuous     Certified    
830 kW (1113 hp)    

46 °C (115 °F)    

750 kW (1006 hp)    

50 °C (122 °F)    
Standby     Low Brake Specific Fuel Consumption    
1000 kW (1341 hp)    

46 °C (115 °F)    

871 kW (1168 hp)    

50 °C (122 °F)    

Caterpillar Information System:

C18 Marine Engines Speed Control (Switch) - Test
C9.3 Tier 4 Final Engines Engine Valve Lash - Inspect/Adjust
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission - Calibrate
C18 Marine and Marine Generator Set Engines Governor - Adjust
C9 Agricultural Engine for Challenger Tractors Oil Pressure Is Low
C9 On-highway Engine General Information
C18 Power Module Control Panel - Inspect
3500B High Displacement Generator Set Engines Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Improved Retention of the Oil Filler Caps on C13 and C15 On-highway Truck Engines{1316} Improved Retention of the Oil Filler Caps on C13 and C15 On-highway Truck Engines{1316}
C32 Power Module Setup
C15 On-Highway Engine Diesel Particulate Filter
C11 and C13 Industrial Engines Alternator and Regulator
2007/10/01 New Software is Now Used on Marine Engines {1901, 1902, 7620}
C32 Marine Engine Engine Oil Level Gauge - Calibrate
3524B and C175 Engines for Off-Highway Truck/Tractors Auxiliary Water Pump
C18 Power Module Voltage Regulators
Updating Wiring and Harnesses for the Exhaust Combustion Groups on Heavy-Duty Engines{1408, 1722} Updating Wiring and Harnesses for the Exhaust Combustion Groups on Heavy-Duty Engines{1408, 1722}
C18 Power Module Single Unit Operation
C18 Marine Engines Sensor Signal (PWM) - Test
CX28 On-Highway Transmission Speed Sensor (Transmission)
CX28 On-Highway Transmission Transmission Control
C13 Engine Flywheel Housing - Remove and Install
C13 On-highway Engine Diesel Particulate Filter
C13 Engine Valve Mechanism Cover Base - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.