Bucket Cylinder
Show/hide table
| |
| Illustration 1 | g03499916 |
Show/hide table
| Item | Qty | Part | Specification description |
|---|---|---|---|
| 1 | 1 | 462-2004 Bushing | Bore before assembly is |
| Installation depth is |
|||
| 2 | 1 | 126-1971 Special Locknut | Before assembly, apply 8T-9579 Oil to the face and threads. |
| Torque to |
|||
| 3 | 2 | 204-2845 Ring | Lubricate the inside diameter and the outside diameter with clean grease. |
| 4 | 1 | 495-8218 Seal As | Lubricate the inside diameter and the outside diameter with clean grease. |
| 5 | 1 | 204-2846 Ring | Lubricate the inside diameter and the outside diameter with clean grease. |
| A | 1 | 362-1915 Hydraulic Cylinder | Bore is |
| B | 1 | 361-1021 Rod As | Diameter is |
| 6 | 11 | 173-9684 Bolt | Torque to |
| C | 1 | 362-9117 Head | Bore over two lands is |
| 7 | 1 | 198-5529 Bushing | Bore before assembly is |
| Installation depth is |
|||
| 8 | 1 | 114-0763 Bushing | Outside diameter is |
| Thickness is |
|||
| 9 | 1 | 333-8672 Buffer Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 10 | 1 | 333-8673 U-Cup Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 11 | 1 | 165-9293 Lip Type Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 12 | - | - | Before assembly, apply green Loctite 609 to the wiper seal groove. |
Caterpillar Information System:
D6R Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6R Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
374F Excavator Machine System Boom Cylinder Lines
Procedure to Install Truck Payload Measurement System on Certain AD55 Underground Articulated Trucks{1408, 7494} Procedure to Install Truck Payload Measurement System on Certain AD55 Underground Articulated Trucks{1408, 7494}
994K Wheel Loader Stairway (Powered) Operation - If Equipped
335F Excavator Machine Systems General Information (Main Control Valve)
C7 and C9 Industrial Engines Power Is Intermittently Low or Power Cutout Is Intermittent
C15 and C18 Engines for Caterpillar Built Machines Oil Temperature Is High
C15 and C18 Engines for Caterpillar Built Machines Oil Consumption Is Excessive
C15 and C18 Engines for Caterpillar Built Machines Intake Manifold Air Temperature Is High
C15 and C18 Engines for Caterpillar Built Machines Intake Manifold Air Pressure Is Low
C15 and C18 Engines for Caterpillar Built Machines Inlet Air Is Restricted
C15 and C18 Engines for Caterpillar Built Machines Fuel Temperature Is High
374F Excavator Machine System Engine Mounting
C4.4 Industrial Engine Engine Oil and Filter - Change
374F Excavator Machine System Bucket Cylinder
2013/11/21 Improved Travel Motor Center Pin/Socket is Now Being Used in Certain 963D Track-Type Loaders {5058}
2013/11/21 Improved Travel Motors Are Now Used on Certain 973D Track-Type Loaders {3202, 5058}
374F Excavator Machine System Bucket Cylinder
Hood Structure Field Assembly Instructions{7251, 7960} Hood Structure Field Assembly Instructions{7251, 7960}
374F Excavator Machine System Auxiliary Hydraulic Lines
C15 and C18 Engines for Caterpillar Built Machines Cooling Fan Control - Test
C15 and C18 Engines for Caterpillar Built Machines Cooling Fan Speed - Test
C15 and C18 Engines for Caterpillar Built Machines Data Link - Test
C15 and C18 Engines for Caterpillar Built Machines Data Link Configuration Status - Test