Axle (Front) - Remove and Install
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件描述 | 数量 |
A | 180-3033 | 千斤顶台架总成 | 1 |
B | 138-7575 | 连杆支架 | 2 |
开始:
- 拆下底盘系统。
- 升起驾驶室。 请参阅操作和保养手册, "驾驶室的掀起和放下"。
Show/hide table
图 1 g01339772 - 将工具 (A) 定位到前桥 (2) 下面。 拆下螺栓 (1 )。
Show/hide table
图 2 g03394911 - 拆下将前桥固定到机器上的两个螺栓 (3)。
Show/hide table
图 3 g01339910 - 重新定位前桥 (2),并将工具 (B) 和适当的起吊设备连接到前桥 (2)。 前桥 (2) 的重量约为
57 kg (125 lb) 。 - 使用适当的起吊设备和工具 (B) 拆下前桥 (2)。
- 重复步骤 1 至 5,以便拆下位于机器相反一侧的前桥。
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件描述 | 数量 |
A | 180-3033 | 千斤顶台架总成 | 1 |
B | 138-7575 | 连杆支架 | 2 |
- 将工具 (B) 和适当的起吊设备连接到前桥 (2) 上。 前桥 (2) 的重量约为
57 kg (125 lb) 。 - 使用工具 (B) 和适当的起吊设备,以便将前桥 (2) 定位到机器上,并将前桥 (2) 靠在工具 (A) 上。
- 拆下工具 (B) 并将前桥 (2) 重新定位到机器上。
Show/hide table
图 5 g03394911 - 安装将前桥固定到机器上的两个螺栓 (3)。
Show/hide table
图 6 g01339955 - 将螺栓 (1) 安装到前桥 (2) 上。
- 重复步骤 1 至 5,以便将前桥 (2) 安装到机器的相反一侧。
- 降下驾驶室。 请参阅操作和保养手册, "驾驶室的掀起和放下"。
Show/hide table
图 4 | g01339942 |
结束:
- 安装底盘系统。
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Nitrogen Oxide Sensor - Remove and Install
924K, 930K and 938K Wheel Loaders Fuel System - Prime
2013/07/08 New Product Link Software for PL300 Is Now Available for All Cat® Products {7606, 7620}
950 GC Wheel Loader Fuel System Primary Filter (Water Separator) Element - Replace
988K Wheel Loader Modulating Valve (Torque Converter Impeller Clutch)
950 GC Wheel Loader Fuel System Primary Filter (Water Separator) - Drain
988K XE Wheel Loader Systems Exhaust Lines
988K XE Wheel Loader Systems Exhaust Pipe
D10T2 Track-Type Tractor Power Train Transmission Hydraulic Control Valve - Disassemble
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Power Train Oil Lines
374F Excavator Monitoring System
924K, 930K and 938K Wheel Loaders Work Tools
2013/07/17 D7 Size Track Idlers Have Changed from Cast to Fabricated Design {4159}
Rear Frame Trunnion Support Weld Repair Procedure{7051} Rear Frame Trunnion Support Weld Repair Procedure{7051}
834K Wheel Dozer and 836K Landfill Compactor Machine Systems Modulating Valve (Torque Converter Lockup Clutch)
950 GC Wheel Loader Fuel System Secondary Filter - Replace
D10T2 Track-Type Tractor Power Train Transmission Hydraulic Control Valve - Assemble
D10T2 Track-Type Tractor Speed Sensor - Test
C15 and C18 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Remove and Install
834K Wheel Dozer and 836K Landfill Compactor Machine Systems Modulating Valve (Torque Converter Impeller Clutch)
2013/07/03 Replacement VIMS Service Lamp Is Now Available On Certain Cat Machines {7431, 7601}
621H OEM Wheel Tractor (Tier 4) Steering System Accumulator (Cushion-Hitch)
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Fuel Tank
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Fuel Tank