VR6 Voltage Regulator Caterpillar


Droop - Adjust

Usage:

3412C 4BZ


Illustration 1g00779370
VR6 Voltage Regulator
(1) Droop adjustment


Illustration 2g01021519

------ DANGER! ------

The Cat VR6 presents an electrical shock/electrocution hazard. This hazard will cause serious injury or death.

Service by trained personnel only.

The terminals and heat sinks are live at hazardous voltages when power is applied and for up to 8 minutes after power is removed.


Variable levels of parallel droop compensation can be obtained by adjusting the droop potentiometer (1). Clockwise rotation increases the amount of droop for a given condition.

Caterpillar Information System:

3500 Engines Air Inlet and Exhaust Lines
3500 Engines Air Lines
3512C and 3516C Marine Auxiliary and Generator Set Engines Flexible Coupling - Inspect
VR6 Voltage Regulator High Voltage
TA19 and TA22 Transmissions Power Train Electronic Control System Diagnostic Trouble Code List
TA19 and TA22 Transmissions Power Train Electronic Control System Transmission
TA19-M2WD and TA19-M4WD (Delta) Agricultural Transmission Power Train Electronic Control System Machine Preparation for Troubleshooting
TA19-M2WD and TA19-M4WD (Delta) Agricultural Transmission Power Train Electronic Control System Connector Locations
TA19-M2WD and TA19-M4WD (Delta) Agricultural Transmission Power Train Electronic Control System General Information
VR6 Voltage Regulator Low Voltage
VR6 Voltage Regulator General Information
VR6 Voltage Regulator Power Factor Regulation and KVAR Regulation
3500 Industrial Engines Exhaust Flange
C280 Marine and Petroleum Engines Engine Governing - Adjust
VR6 Voltage Regulator Voltage Regulator - Test
TA19 and TA22 Transmissions Power Train Electronic Control System Parameters
TA19 and TA22 Transmissions Power Train Electronic Control System Connector Contact Description
TA19 and TA22 Transmissions Power Train Electronic Control System System Schematic
G3408C and G3412C Engines Water Temperature Regulator
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Pump Circuit - Test
2006/12/11 New Software is Used for the Marine Power Display {1902, 7451, 7490, 7620}
VR6 Voltage Regulator Wiring Diagrams
C6.6 Industrial Engine Engine Description
TA19 and TA22 Transmissions Power Train Electronic Control System Transmission, SPN 117 - FMI 2
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.