3500 Engines Caterpillar


Air Inlet and Exhaust Lines

Usage:

3512C ED4


图 1g02599017


图 2g02599018
螺栓拧紧顺序

表 1
技术规格 - 283-2546 进气和排气管路、 297-5562 进气和排气管路、 276-2449 进气和排气管路、 282-8315 进气和排气管路、 286-3047 进气和排气管路和 295-6337 进气和排气管路 
项目  数量  零件  技术规格说明 
7X-0370 螺栓  按照图 2 中所示的顺序拧紧螺栓至标准扭矩。 
24 7X-0368 螺栓 

Caterpillar Information System:

3500 Engines Air Lines
3512C and 3516C Marine Auxiliary and Generator Set Engines Flexible Coupling - Inspect
VR6 Voltage Regulator High Voltage
TA19 and TA22 Transmissions Power Train Electronic Control System Diagnostic Trouble Code List
TA19 and TA22 Transmissions Power Train Electronic Control System Transmission
TA19-M2WD and TA19-M4WD (Delta) Agricultural Transmission Power Train Electronic Control System Machine Preparation for Troubleshooting
TA19-M2WD and TA19-M4WD (Delta) Agricultural Transmission Power Train Electronic Control System Connector Locations
TA19-M2WD and TA19-M4WD (Delta) Agricultural Transmission Power Train Electronic Control System General Information
VR6 Voltage Regulator Low Voltage
VR6 Voltage Regulator General Information
VR6 Voltage Regulator Power Factor Regulation and KVAR Regulation
VR6 Voltage Regulator Series Boost
VR6 Voltage Regulator Droop - Adjust
3500 Industrial Engines Exhaust Flange
C280 Marine and Petroleum Engines Engine Governing - Adjust
VR6 Voltage Regulator Voltage Regulator - Test
TA19 and TA22 Transmissions Power Train Electronic Control System Parameters
TA19 and TA22 Transmissions Power Train Electronic Control System Connector Contact Description
TA19 and TA22 Transmissions Power Train Electronic Control System System Schematic
G3408C and G3412C Engines Water Temperature Regulator
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Pump Circuit - Test
2006/12/11 New Software is Used for the Marine Power Display {1902, 7451, 7490, 7620}
VR6 Voltage Regulator Wiring Diagrams
C6.6 Industrial Engine Engine Description
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.