C32 Marine Engines Caterpillar


Pistons and Connecting Rods - Disassemble

Usage:

C32 AX2

拆解步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
6V-6192  钳子 
7M-3978(1)  活塞环扩张器总成 
7B-7974(2) 活塞环扩张器总成 
(1) 137 mm (5.4 inch) 孔一起使用。
(2) 145 mm (5.7 inch) 孔一起使用。

开始:

  1. 拆下活塞和连杆。 请参阅拆解和组装, "活塞和连杆 - 拆卸"。

注: 为每个活塞和连接杆组件的部件做标记。 所有部件必须安装回原来的位置。 请勿交换使用部件。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。




    图 1g01048512

  1. 从连杆轴承盖 (11) 上拆卸下连杆轴承 (10)。

  2. 从连杆 (6) 上拆卸上连杆轴承 (9)。

  3. 使用工具 (A) 将销挡圈 (5) 从活塞体组件 (4) 上拆下。

  4. 从活塞体组件上拆下连杆销 (8) 和连杆 (6)。

  5. 使用工具 (B) 将活塞环 (1)、 (2) 和 (3) 从活塞体组件上拆下。

  6. 此时不要卸下轴承 (7)。

    注: 当在连杆上安装新轴承后,轴承方可从连杆上卸下。

Caterpillar Information System:

C32 Marine Engines Pistons and Connecting Rods - Install
C32 Marine Engines Pistons and Connecting Rods - Remove
986H Wheel Loader Starting System - Test
D6K2 Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6K2 Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
C32 Marine Engines Piston Cooling Jets - Remove and Install
C32 Marine Engines Cylinder Liner - Install
D8R and D8T Track-Type Tractors Battery Disconnect Switch
Field Installation Instructions for the Variable Pitch Fan System on 980K Wheel Loaders{1071, 107P, 1356, 1386, 138R, 7620} Field Installation Instructions for the Variable Pitch Fan System on 980K Wheel Loaders{1071, 107P, 1356, 1386, 138R, 7620}
C32 Marine Engines Cylinder Liner - Remove
374F Excavator Additional Messages
2012/10/24 A New Water Temperature Regulator Is Available for Certain Commercial Engines {1355}
826K Landfill Compactor Belt - Inspect/Adjust/Replace
C32 Marine Engines Pistons and Connecting Rods - Assemble
C32 Marine Engines Inlet and Exhaust Valve Guides - Remove and Install
2012/10/03 A New Valve Lifter Assembly Is Used in 3500B Engines {1209}
2012/10/30 A New Valve Lifter Assembly Is Used in 3500B and 3500C Engines {1209}
C32 Marine Engines Engine Oil Filter Base - Disassemble
2012/10/03 Importance of Proper Valve Lash Setting {1102, 1121, 1123, 1209}
2012/10/04 Importance of Proper Valve Lash Setting {1102, 1121, 1123}
Installation Procedure for the 423-5844 Conversion Kit {5057, 5147, 5734, 6129, 7332} Installation Procedure for the 423-5844 Conversion Kit {5057, 5147, 5734, 6129, 7332}
C32 Marine Engines Engine Oil Filter Base - Assemble
Procedure to Configure VIMS 3G® On Certain Cat® Products {7601} Procedure to Configure VIMS 3G® On Certain Cat® Products {7601}
AD60 Underground Articulated Truck Power Train Electronic Control System Solenoid Valves
AD60 Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 0177 - FMI 04
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.