C32 Marine Engines Caterpillar


Cylinder Liner - Install

Usage:

C32 AX2

安装步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
2P-8260  缸套安装器 
207-1601  橡胶润滑剂 


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。


  1. 检查缸套突出量。 请参阅测试和调整, "缸套突出量 - 检查"。


    图 1g01149469

  2. 将缸套密封 (3) 安装在缸套 (1) 上。

  3. 缸套孔表面和缸套密封件上 (3) 使用工具 (C)。

  4. 把加注口带箍 (2) 在清洁的发动机机油中浸泡一会儿。 然后立刻将加注口箍带安装到缸套上。

  5. 使用工具 (B) 来把缸套 (1) 安装到缸体中。 确保一切与缸套凸出量有关的标记都要校准。

结束:

  1. 安装活塞和连杆。 请参阅拆解和组装, "活塞和连杆 - 安装"。

Caterpillar Information System:

D8R and D8T Track-Type Tractors Battery Disconnect Switch
Field Installation Instructions for the Variable Pitch Fan System on 980K Wheel Loaders{1071, 107P, 1356, 1386, 138R, 7620} Field Installation Instructions for the Variable Pitch Fan System on 980K Wheel Loaders{1071, 107P, 1356, 1386, 138R, 7620}
C32 Marine Engines Cylinder Liner - Remove
374F Excavator Additional Messages
2012/10/24 A New Water Temperature Regulator Is Available for Certain Commercial Engines {1355}
826K Landfill Compactor Belt - Inspect/Adjust/Replace
C32 Marine Engines Camshaft Bearings - Install
C32 Marine Engines Camshaft Bearings - Remove
C32 Marine Engines Unit Injector - Remove
C32 Marine Engines Unit Injector - Install
374F Excavator Fuel Transfer Pump (Refueling) - If Equipped
826K Landfill Compactor Brake Accumulator - Check
C32 Marine Engines Piston Cooling Jets - Remove and Install
D6K2 Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6K2 Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
986H Wheel Loader Starting System - Test
C32 Marine Engines Pistons and Connecting Rods - Remove
C32 Marine Engines Pistons and Connecting Rods - Install
C32 Marine Engines Pistons and Connecting Rods - Disassemble
C32 Marine Engines Pistons and Connecting Rods - Assemble
C32 Marine Engines Inlet and Exhaust Valve Guides - Remove and Install
2012/10/03 A New Valve Lifter Assembly Is Used in 3500B Engines {1209}
2012/10/30 A New Valve Lifter Assembly Is Used in 3500B and 3500C Engines {1209}
C32 Marine Engines Engine Oil Filter Base - Disassemble
2012/10/03 Importance of Proper Valve Lash Setting {1102, 1121, 1123, 1209}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.