Supplemental Parts Information for the UAE 972H{0374, 7000} Caterpillar


Supplemental Parts Information for the UAE 972H{0374, 7000}

Usage:

972H WLA
Wheel Loader:
972H (S/N: WLA1-9)

Introduction

This Special Instruction contains supplemental parts information for the 972H Wheel Loader for the UAE. The machine configuration is noted in the following chart. This special instruction is a supplement to the parts manual for your machine.

Parts Information

Table 1
Merchandising Ar    
306-1821 MERCHANDISING ARRANGEMENT
PIN (S/N: WLA1-9)    
Qty     Pt. No.     Description     Table    
1     100-6669     EDGE GP-CUTTING      (1)    
1     119-4376     GUARD GP-POWER TRAIN      (1)    
1     133-1693     BUCKET GP      (1)    
1     198-7248     DRAIN GP-ECOLOGY      (1)    
1     235-8560     LIGHTING GP-FLOOD      (1)    
1     236-8956     STARTING AID GP-ETHER      (1)    
1     236-9087     STEERING AR-SECONDARY      (1)    
1     236-9094     CONTROL AR-RIDE      (1)    
1     236-9129     LINES GP-DIAG.      (1)    
1     236-9135     PRECLEANER AR      (1)    
1     254-5525     LIGHTING AR-ROADING      (1)    
1     258-7480     CAMERA AR      (1)    
1     306-6313     TRACTOR AR      (1)    
1     109-8203     MIRROR GP      (1)    
1     197-6474     MIRROR GP      (1)    
1     308-7854     AIR CONDITIONER AR      (1)    
1     310-7883     CNVRS AR-CAB MOUNT      (1)    
( 1 ) Refer to Parts Manual, SEBP5004.

Table 2
306-6322AXLE AR-FIXED
PIN (S/N: WLA1-9)    
Qty     Pt. No.     Description     Ref    
1     129-4304     DIFF GP-LMTD SLIP      (1)    
1     160-0719     HEAT EXCH. GP-AXLE      (1)    
2     180-8633     BRAKE & PLANETARY GP      (2)    
1     220-7925     PLATE GP-AXLE IDENT.      (2)    
1     251-4879     GEAR GP-BEVEL & PINION      (2)    
1     319-7258     HSG GP-AXLE        
( 1 ) Refer to Parts Manual, SEBP2703-80.
( 2 ) Refer to Parts Manual, SEBP5004-01.



Illustration 1g01561853

(1) 4E-2240 Bearing Nut

(2) 5H-3701 Purge Screw

(3) 5P-4484 Magnetic Plug

(4) 8R-0512 Oil Level Gauge As

(5) 8T-0336 Pressure Relief Fitting

(6) 9G-5317 Duo-Cone Seal Gp

(7) 127-8910 Axle Shaft

(8) 130-5869 Pinion Housing

(9) 130-8707 Shim Pack

(10) 133-4292 Lip Type Seal

(11) 156-4773 Retainer

(12) 190-5973 Housing As

(13) 251-4525 Axle Shaft Housing

(14) 251-6480 Tapered Roller Bearing As

(15) 251-6481 Tapered Roller Bearing As

(16) 3B-0551 Pipe Plug

(17) 4K-6804 O-Ring Seal

(18) 5H-5012 Retaining Ring

(19) 5P-8247 Hard Washer

(20) 6V-5686 Bolt

(21) 6V-7732 Bolt

(22) 7M-8485 O-Ring Seal

(23) 8T-0207 Bolt

(24) 9C-6041 Dowel

(25) 9S-9334 O-Ring Plug

(26) 9X-2027 Washer

(27) 9X-2075 Bolt

(28) 8C-8422 Sealant

Table 3
306-6323 AXLE AR-OSCILLATING
 (1)
PIN (S/N: WLA1-9)    
Qty     Pt. No.     Description     Table    
1     129-4292     GEAR GP-BEVEL & PINION      (1)    
1     129-4298     DIFFERENTIAL GP      (1)    
1     160-0719     HEAT EXCHANGER GP-AXLE      (1)    
2     180-8633     BRAKE & PLANETARY GP      (1)    
1     180-8635     HOUSING GP-AXLE      (1)    
1     220-7925     PLATE GP-AXLE IDENTIFICATION      (1)    
( 1 ) Parts Manual, SEBP5004-01

Caterpillar Information System:

C7.1 Industrial Engine Cooling System
D6K2 Track-Type Tractor Systems Solenoid Valve (Pilot On/Off)
993K Wheel Loader Power Train Transmission Oil Pump - Install
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Restriction of Air Inlet and Exhaust
993K Wheel Loader C32 Engine Supplement Exhaust Cooler (NRS) - Remove and Install
3512C and 3516C Marine Engines Turbocharger
D6K2 Track-Type Tractor Systems General Information (Hydraulic System)
993K Wheel Loader Machine Systems Hydraulic Tank - Remove
D6K2 Track-Type Tractor Machine Systems Piston Pump (Winch)
986H Wheel Loader Hydraulic Tank Breaker Relief Valve - Clean
986H Wheel Loader Hydraulic System Oil Sample - Obtain
980K Wheel Loader Quick Coupler Operation (Block Handler) - If Equipped
993K Wheel Loader Power Train Axle Oil Cooler (Front) - Remove and Install
D6K Track-Type Tractor Daily Inspection
D6K2 Track-Type Tractor Systems General Information (Power Train System)
993K Wheel Loader Power Train Input Transfer Gears - Disassemble
993K Wheel Loader Power Train Input Transfer Gears - Assemble
D6K Track-Type Tractor Seat
2012/09/27 A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500 Machine Engines {1317}
2013/08/21 A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500, G3500, 3600, G3600, and C280 Engines {1317}
988H Wheel Loader Maintenance Interval Schedule
AD60 Underground Articulated Truck Steering System Pump Flow - Test - Steering Pump
2012/06/25 Correction to Operation and Maintenance Manual , "Lubricant Viscosities and Refill Capacities" for AD55B Underground Articulated Trucks {1000, 7000, 7581}
AD60 Underground Articulated Truck Steering System Steering System Pressure - Test and Adjust
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.