The Actuator for Air Conditioner Group and Cab Heater Group Is Now Improved on Certain Track-Type Loaders and Track-Type Tractors {7304, 7320}
- Track-Type Loader:
- 953D (S/N: LBP1-UP)
- Track-Type Tractor:
- D6K LGP (S/N: DHA1-UP)
- 963D (S/N: LCS1-UP)
- 973D (S/N: LCP1-UP)
- D6K XL (S/N: FBH1-UP)
- D6N XL (S/N: DJA1-UP)
- D6N LGP (S/N: GHS1-UP)
- D6N XL (S/N: MLW1-UP)
- D6N LGP (S/N: DJY1-UP)
Description of Change: The improved actuator is equipped with an internal gasket and sealed pins to prevent moisture entry into the electrical component. The improved actuator will have increased service life.
Adaptable To:
Show/hide table
Illustration 1 | g02953778 |
The 279-0850 Actuator |
Show/hide table
Illustration 2 | g03177781 |
The 279-0850 Actuator Change 03 |
The improved 279-0850 Actuator Change 03 is adaptable and effective in production with the machines that are listed in Table 1.
Show/hide table
Adaptability     | Effectivity     |
S/N:LBP1-1472     | S/N:LBP1473-UP     |
S/N:LCS1-1873     | S/N:LCS1874-UP     |
S/N:LCP1-280     | S/N:LCP281-UP     |
S/N:DHA1-2291     | S/N:DHA2292-UP     |
S/N:FBH1-2627     | S/N:FBH2628-UP     |
S/N:DJY1-UP     | -     |
S/N:GHS1-1499     | S/N:GHS1500-UP     |
S/N:DJA1-UP     | -     |
S/N:MLW1-774     | S/N:MLW775-UP     |
Caterpillar Information System:
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130} Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
D6K2 Track-Type Tractor Engine Supplement Hood - Remove and Install
950H Wheel Loader and 962H Wheel Loader Electrohydraulic System ECM Location Code - Test
Custom Product Support Literature for 980K Wheel Loaders That Are Equipped with the 330-4870 Steel Mill Arrangement {0374, 7000} Custom Product Support Literature for 980K Wheel Loaders That Are Equipped with the 330-4870 Steel Mill Arrangement {0374, 7000}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134} Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131} Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Pump Gear Drive Inside Diameter{0374, 0599, 0679, 3101} Thermal Spray Procedures for Pump Gear Drive Inside Diameter{0374, 0599, 0679, 3101}
950H Wheel Loader and 962H Wheel Loader Braking and Hydraulic Fan System Hydraulic Fan Speed - Test and Adjust
Thermal Spray Procedures for Torque Converter Carrier - Bearing Diameter {0679, 3101, 3135} Thermal Spray Procedures for Torque Converter Carrier - Bearing Diameter {0679, 3101, 3135}
D5R Track-Type Tractor Lubricant Viscosities
D5R Track-Type Tractor Model Specific Coolant Information
Thermal Spray Procedures for Torque Converter Output Flange {0679, 3101} Thermal Spray Procedures for Torque Converter Output Flange {0679, 3101}
Thermal Spray Procedures for Torque Converter Carrier - Taper Bearing Diameter{0679, 3101, 3125} Thermal Spray Procedures for Torque Converter Carrier - Taper Bearing Diameter{0679, 3101, 3125}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135} Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Splined Shaft{0679, 3101} Thermal Spray Procedures for Splined Shaft{0679, 3101}
2012/03/28 A New Coolant Conditioner Is Now Available {1350, 1352, 1395}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127} Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
2012/03/28 A New Coolant Conditioner Is Now Available {1350, 1352, 1395}
993K Wheel Loader C32 Engine Supplement Fuel Tank - Install
D5R Track-Type Tractor Capacities (Refill)
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209} Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
950H Wheel Loader and 962H Wheel Loader Power Train Input Transfer Gears
Thermal Spray Procedures for Exhaust Manifold (I.D. ; O.D.){0679, 1059} Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
2012/08/29 An Improved Lip Type Seal Within the Steering Valve Group is Now Used on Certain Wheel Tractor Scrapers {4307}