A New Coolant Conditioner Is Now Available {1350, 1352, 1395}
- Caterpillar Products:
- All
ReferenceSpecial Instruction, REHS7296, "Instructions for Use of Cat Coolant Conditioner for Aluminum Components" for more information on how and when to use this coolant conditioner.
A new coolant conditioner is available for cooling systems that utilize aluminum cooling system components. The coolant conditioner provides additional protection to the engine when ELC coolant is used with aluminum components. The coolant conditioner is available in the following sizes: 44.4 mL (1.5 oz) and 73.9 mL (2.5 oz).
Caterpillar Information System:
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127} Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
2012/03/28 A New Coolant Conditioner Is Now Available {1350, 1352, 1395}
Thermal Spray Procedures for Splined Shaft{0679, 3101} Thermal Spray Procedures for Splined Shaft{0679, 3101}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135} Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Taper Bearing Diameter{0679, 3101, 3125} Thermal Spray Procedures for Torque Converter Carrier - Taper Bearing Diameter{0679, 3101, 3125}
2012/08/24 The Actuator for Air Conditioner Group and Cab Heater Group Is Now Improved on Certain Track-Type Loaders and Track-Type Tractors {7304, 7320}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130} Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
D6K2 Track-Type Tractor Engine Supplement Hood - Remove and Install
950H Wheel Loader and 962H Wheel Loader Electrohydraulic System ECM Location Code - Test
Custom Product Support Literature for 980K Wheel Loaders That Are Equipped with the 330-4870 Steel Mill Arrangement {0374, 7000} Custom Product Support Literature for 980K Wheel Loaders That Are Equipped with the 330-4870 Steel Mill Arrangement {0374, 7000}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134} Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131} Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
993K Wheel Loader C32 Engine Supplement Fuel Tank - Install
D5R Track-Type Tractor Capacities (Refill)
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209} Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
950H Wheel Loader and 962H Wheel Loader Power Train Input Transfer Gears
Thermal Spray Procedures for Exhaust Manifold (I.D. ; O.D.){0679, 1059} Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
2012/08/29 An Improved Lip Type Seal Within the Steering Valve Group is Now Used on Certain Wheel Tractor Scrapers {4307}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073} Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
D5R Track-Type Tractor Access Doors and Covers
Thermal Spray Procedures for Hydraulic Swivel {0679, 5060} Thermal Spray Procedures for Hydraulic Swivel {0679, 5060}
Instructions for Bonding Non-Metallic Components {7301, 7305} Instructions for Bonding Non-Metallic Components {7301, 7305}
Thermal Spray Procedures for Steering Clutch Housing{0679, 4100, 4101} Thermal Spray Procedures for Steering Clutch Housing{0679, 4100, 4101}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268} Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}