C6.6 Engines for Caterpillar Built Machines Caterpillar


Fuel Injection Lines

Usage:

924K PWR

------ WARNING! ------

Contact with high pressure fuel may cause fluid penetration and burn hazards. High pressure fuel spray may cause a fire hazard. Failure to follow these inspection, maintenance and service instructions may cause personal injury or death.


Refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" before adjustments and repairs are performed.


NOTICE

Refer to Systems Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.


Ensure that all adjustments and repairs are performed by authorized personnel that have had the correct training.



Illustration 1g02293673
Typical example

Table 1
Specifications for 345-4146 Fuel Injection Lines Gp and 345-4147 Fuel Injection Lines Gp 
Callout  Part Number  Part Name  Specification Description 
345-4146  Fuel Injection Lines Gp  Torque to................... 55 N·m (41 lb ft) 
345-4147  Fuel Injection Lines Gp  Torque to................... 55 N·m (41 lb ft) 
338-8797  Line As - Fuel  Torque to................... 55 N·m (41 lb ft) 

Caterpillar Information System:

950K and 962K Wheel Loaders C7.1 Engine Supplement Soot Sensor - Remove and Install
992K Wheel Loader Electrohydraulic System Check Valve
950K and 962K Wheel Loaders C7.1 Engine Supplement Unit Injector - Remove
992K Wheel Loader Electrohydraulic System Piston Pump (Hydraulic Fan)
950K and 962K Wheel Loaders C7.1 Engine Supplement Pressure Sensor (DPF) - Remove and Install - Clean Emissions Module
950K and 962K Wheel Loaders C7.1 Engine Supplement Hood - Remove and Install
C32 LRC Engine for Track-Type Tractors Diagnostic Trouble Codes
C32 LRC Engine for Track-Type Tractors Event Codes
2011/12/07 A New Ride Control Accumulator is Available with Improved Seals {5004, 5077}
D9T Track-Type Tractor Systems Drawbar
D9T Track-Type Tractor Power Train Control Group (Steering)
D6 Track Type Tractor Machine Systems Bulldozer Trunnion
950K and 962K Wheel Loaders C7.1 Engine Supplement Unit Injector - Install
950K and 962K Wheel Loaders C7.1 Engine Supplement Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C6.6 Engines for Caterpillar Built Machines Fuel Injection Pump
C6.6 Engines for Caterpillar Built Machines Fuel Injection Nozzles
C6.6 Engines for Caterpillar Built Machines Fuel Transfer Pump
950K and 962K Wheel Loaders C7.1 Engine Supplement Nozzle Heater Harness - Remove and Install
950K and 962K Wheel Loaders C7.1 Engine Supplement Unit Injector Hydraulic Pump - Remove
950K and 962K Wheel Loaders C7.1 Engine Supplement Diesel Particulate Filter - Remove
950K and 962K Wheel Loaders C7.1 Engine Supplement Unit Injector Hydraulic Pump - Install
950K and 962K Wheel Loaders C7.1 Engine Supplement Diesel Particulate Filter - Install
992K Wheel Loader Electrohydraulic System MID 082 - CID 0262 - FMI 03
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Transmission, Torque Converter, Transfer Gears and Differential - Remove and Install - Tractor
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.