Hood - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 189-0408     | Shackle     | 1     |
B     | 1U-8221     | Strap     | 1     |
C     | 138-7575     | Link Bracket     | 4     |
Note: Remove Hood fully before any hood panels are removed. Failure to do so may damage to the hood panels.
- Open the rear enclosure.
- Remove panel (1) .
Show/hide table
Illustration 1 | g02179873 |
- Disconnect harness assemblies (2) and remove clip (3) .
Show/hide table
Illustration 2 | g02179813 |
- Remove pin (4) .
Show/hide table
Illustration 3 | g02180048 |
- Remove bolts (5) .
Show/hide table
Illustration 4 | g02180051 |
- Remove plug (6) .
Show/hide table
Illustration 5 | g02180074 |
- Attach Tooling (B) to the enclosure frame. Attach Tooling (A) to Tooling (B) and to the rear enclosure latch.
Show/hide table
Illustration 6 | g02180093 |
- Attach Tooling (C) and suitable lifting device to hood assembly (7). The weight of hood assembly (7) is approximately 286 kg (630 lb).
Show/hide table
Illustration 7 | g02724779 |
- Disconnect hinges (8). Remove hood assembly (7) .
Show/hide table
Illustration 8 | g02180193 |
Installation Procedure
- Install hood assembly (7) in the reverse order of the removal.
Caterpillar Information System:
C32 LRC Engine for Track-Type Tractors Diagnostic Trouble Codes
C32 LRC Engine for Track-Type Tractors Event Codes
2011/12/07 A New Ride Control Accumulator is Available with Improved Seals {5004, 5077}
D9T Track-Type Tractor Systems Drawbar
D9T Track-Type Tractor Power Train Control Group (Steering)
D6 Track Type Tractor Machine Systems Bulldozer Trunnion
D9R Track-Type Tractor Systems Idler Guard
2011/10/03 Hydraulic Oil Additive Helps Reduce Noise on Medium Wheel Loaders {5056, 5095, 5095}
320 GC, 320 and 323 Excavator Machine Systems Specifications Swing Gear and Bearing
D9T Track-Type Tractor Power Train Segmented Sprocket (Drive)
D6T Track Type Tractor Machine Systems Idlers (Track)
D6T Track-Type Tractor Hydraulic System Bulldozer Blade
950K and 962K Wheel Loaders C7.1 Engine Supplement Pressure Sensor (DPF) - Remove and Install - Clean Emissions Module
992K Wheel Loader Electrohydraulic System Piston Pump (Hydraulic Fan)
950K and 962K Wheel Loaders C7.1 Engine Supplement Unit Injector - Remove
992K Wheel Loader Electrohydraulic System Check Valve
950K and 962K Wheel Loaders C7.1 Engine Supplement Soot Sensor - Remove and Install
C6.6 Engines for Caterpillar Built Machines Fuel Injection Lines
950K and 962K Wheel Loaders C7.1 Engine Supplement Unit Injector - Install
950K and 962K Wheel Loaders C7.1 Engine Supplement Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C6.6 Engines for Caterpillar Built Machines Fuel Injection Pump
C6.6 Engines for Caterpillar Built Machines Fuel Injection Nozzles
C6.6 Engines for Caterpillar Built Machines Fuel Transfer Pump
950K and 962K Wheel Loaders C7.1 Engine Supplement Nozzle Heater Harness - Remove and Install