Fan Drive
Show/hide table
图 1 | g00904732 |
(1) 将适配器的六角头固定螺钉拧紧至以下扭矩。 ... 11 N·m (8 lb ft)
(2) 将风扇的调节螺钉拧紧至以下扭矩。 ... 11 N·m (8 lb ft)
Caterpillar Information System:
C15 and C18 Petrolem Generator Set Engines ECM Software - Install
C7 Engines for Caterpillar Built Machines Crankshaft
320D and 323D Excavators Machine System Specifications Pilot Valve (Joystick)
12M Motor Grader Work Tool Lift - Lubricate
C7 Engines for Caterpillar Built Machines Water Temperature Regulator
C7 Engines for Caterpillar Built Machines Water Temperature Regulator
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Lines
C1.5 and C2.2 Engines for Caterpillar Built Machines Turbocharger
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Injection Lines
2006/09/01 277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
12M Motor Grader Scarifier Teeth - Inspect/Replace - If Equipped
C280-12 and C280–16 Marine Engines Idler Gears (Rear) - Install
390F Excavator Machine Systems Swing Drive - Disassemble
C7 Engines for Caterpillar Built Machines Crankshaft Seals
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Controller Board Battery - Replace
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys DC Bus Voltage - Calibrate
3606 and 3608 Engines Housing (Rear) - Remove
390F Excavator Machine Systems Swing Drive - Assemble
C7 Engines for Caterpillar Built Machines Piston Cooling Jet
C7 Engines for Caterpillar Built Machines Piston Cooling Jet
C15 On-Highway Engine ARD Combustion Air Pressure Sensor - Remove and Install - Differential Pressure
3606 and 3608 Engines Housing (Rear) - Install
C13 Engine Clean Gas Induction Pressure Sensor - Remove and Install
C27 and C32 Industrial Engines Electronic Unit Injector - Remove