950K Wheel Loader and 962K Wheel Loader Power Train Caterpillar


Differential (Standard)

Usage:

950K FER



Illustration 1g02665762

Table 1
Specification for 137-1392 Differential Gp    
Item     Qty     Part     Specification Description    
1     1     136-6550 Case As     Before assembly, all contact surfaces of the differential case (1) and the thrust washers (2) to be clean and dry. Use Castrol Kleen 3414 or 222-3124 Component Cleaner to clean the surfaces.
Before assembly, apply green Loctite 620 to the contact surfaces of the differential case and the thrust washers.
Assemble the thrust washers with the grooved side of the thrust washer against the gear (4).
Before assembly, apply green Loctite 620 to the lock threads of the flat head screws (3) to the thrust washer.
Finger tighten the flat head screws to the thrust washer on either side.    
2     2     148-7383 Thrust Washer    
3     8     127-1960 Flat Head Screw    
4     2     136-6551 Gear    

Caterpillar Information System:

D3K2, D4K2 and D5K2 Track-Type Tractors Machine Systems Pump Drive Coupling
2013/08/21 Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {1201, 1216}
D11T Track-Type Tractor Power Train Transmission Hydraulic Control
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System Pilot Oil Accumulator (Dead Engine, Lift Arm Lower) - Test and Charge
C13, C15, and C18 Tier 4 Final Engines Cylinder Head Valves
950K Wheel Loader and 962K Wheel Loader Power Train Engine and Transmission Mounting
950K Wheel Loader and 962K Wheel Loader Power Train Output Transfer Gears
950K and 962K Wheel Loaders Machine Systems Steering Control Valve (Command Control Steering) - Assemble
950K and 962K Wheel Loaders Machine Systems Steering Control Valve (Command Control Steering) - Disassemble
924K, 930K and 938K Wheel Loaders Electrohydraulic System Electronic Control Module
G3500B Engines Exhaust Bypass Valve - Wastegate
C4.4 Engines for Caterpillar Built Machines Electric Starting System - Test
C4.4 Engines for Caterpillar Built Machines Flywheel - Inspect
950K and 962K Wheel Loaders Machine Systems Piston Pump (Steering) - Remove and Install
854K Wheel Dozer Electrohydraulic System Main Control Valve
C4.4 Engines for Caterpillar Built Machines Connecting Rod - Inspect
924K, 930K and 938K Wheel Loaders Electrohydraulic System Gear Motor (Hydraulic Fan)
C4.4 Engines for Caterpillar Built Machines Crankshaft Pulley - Check
C4.4 Engines for Caterpillar Built Machines Gear Group - Inspect
854K Wheel Dozer and 992K Wheel Loader Power Train Connector Locations
D6N Track-Type Tractor MID 039 - CID 1884 - FMI 03
D6N Track-Type Tractor MID 039 - CID 1884 - FMI 05
Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239} Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.