Turbocharger
Show/hide table
 | |
| Illustration 1 | g02608136 |
Show/hide table
| Specification for 349-1817 Turbocharger Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 239-5858 Compressor Clamp Assembly | Use the following procedure in order to tighten the compressor clamp assembly: |
| 1. Tighten the clamp to 14.0 ± 1.5 N·m (124.0 ± 13.0 lb in). |
|||
| 2. Gently tap around the clamp. | |||
| 3. Again tighten the clamp to 14.0 ± 1.5 N·m (124.0 ± 13.0 lb in). |
|||
| 2 | 16 | 2N-2766 Locknut | Torque to 55 ± 5 N·m (41 ± 4 lb ft). |
| 3 | 16 | 2N-2765 High Temperature Bolt | Apply Loctite Nickel Anti Seize on the washer face and the bolt threads before assembly. |
| 4 | 1 | 9N-2038 Turbine Clamp As | Use the following procedure in order to tighten the turbine clamp assembly: |
| 1. Tighten the clamp to 16 N·m (142 lb in). |
|||
| 2. Loosen the clamp to 2-3 turns. | |||
| 3. Gently tap around the clamp. | |||
| 4. Again tighten the clamp to 12.4 N·m (110.0 lb in) to 14.7 N·m (130.0 lb in). |
|||
Caterpillar Information System:
C9 Engine for Caterpillar Built Machines Coolant Temperature Is Too High
992K Wheel Loader Engine Water Pump - Inspect
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Transmission Lubrication Oil Pressure - Test - Rear Power Train
854K Wheel Dozer and 992K Wheel Loader Power Train Calibrations (Operator Monitor)
854K Wheel Dozer and 992K Wheel Loader Power Train Calibrations (Cat ET)
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057} Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Transmission Planetary - Disassemble - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System Electrical Component and Connector Locations
992K Wheel Loader Engine Oil and Filter - Change
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Transmission Lubrication Oil Pressure - Test
994F and 994H Wheel Loaders Automatic Lubrication System Pressure Sensor (Automatic Lubrication)
C32 Auxiliary Engine Cold Weather Starting
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Turbocharger
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Exhaust Manifold
C13, C15, and C18 Tier 4 Final Engines Piston and Rings
C3.4B Engines For Caterpillar Built Machines Camshaft Bearings
994H Wheel Loader Electrohydraulic System Calibrations (Cat ET)
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
C15 and C18 Tier 4 Final Engines Swirl Plate (ARD Combustion) - Inspect/Clean
992K Wheel Loader and 854K Wheel Dozer Steering System Piston Pump (Steering) Margin Pressure - Test and Adjust
992K Wheel Loader and 854K Wheel Dozer Steering System Steering Pilot System Pressure - Test and Adjust
992K Wheel Loader and 854K Wheel Dozer Steering System Relief Valve (Steering Cylinder Crossover) - Test and Adjust
992K Wheel Loader and 854K Wheel Dozer Steering System Relief Valve (Pump Backup) - Test and Adjust